Solid carbide internal thread milling/whirling cutters
E.1768.1
Suitable for material
(Click for material suitability)P
General construction steel / free machining steel
| Material | <500 N/mm² | <700 N/mm² | <850 N/mm² | <1000 N/mm² | <1400 N/mm² |
|---|---|---|---|---|---|
| Suitability |
|
|
|
|
|
P
Heat treatable steel
| Material | <850 N/mm² | <1000 N/mm² | <1400 N/mm² | >1400 N/mm² |
|---|---|---|---|---|
| Suitability |
|
|
|
|
M
Rust and acid constant steels
| Material | <700 N/mm² | >700 N/mm² |
|---|---|---|
| Suitability |
|
|
K
Cast iron and cast iron alloy
| Material | Cast iron until 180 HB | Metallable cast iron | Cast iron with nodular graphite |
|---|---|---|---|
| Suitability |
|
|
|
N
Non-ferrous metal, plastics, graphite
| Material | Aluminium und AL-alloyed until 6% Si | Aluminium und AL-alloyed (under 12% Si) | Aluminium alloyed over 12% Si | Copper, brass, bronze, red brass | Plastics - thermoplast | Plastics - duroplast | GFK/CFK | Graphite |
|---|---|---|---|---|---|---|---|---|
| Suitability |
|
|
|
|
|
S
Special alloy and titanium
| Material | Inconel, Hastelloy, Nimonic, Monel | Titanium |
|---|---|---|
| Suitability |
|
|
H
Hardened steel
| Material | 45-55 HRC | 55-60 HRC | 60-65 HRC |
|---|---|---|---|
| Suitability |
|
|
|
| Product-Nr. |
|
|
|
|
|
|
|
in stock | Request | Alternatives |
|---|---|---|---|---|---|---|---|---|---|---|
|
E.1768.1.0050
|
M 4 | 2.3 | 50 | 6.75 | 4,00 | 0,50 | 3 |
|
||
|
E.1768.1.0075
|
M 6 | 4.5 | 63 | 10.87 | 6,00 | 0,75 | 3 |
|
||
|
E.1768.1.0100
|
M 8 | 4.5 | 63 | 13.5 | 6,00 | 1,00 | 3 |
|
||
|
E.1768.1.0100.4
|
M 10 | 8 | 63 | 17.5 | 8,00 | 1,00 | 4 |
|
||
|
E.1768.1.0150
|
M 12 | 7.5 | 76 | 27.75 | 8,00 | 1,50 | 3 |
|
||
|
E.1768.1.0150.4.14
|
M 14 | 10 | 76 | 23.25 | 10,00 | 1,50 | 4 |
|
||
|
E.1768.1.0150.4.16
|
M 16 | 12 | 83 | 29.25 | 12,00 | 1,50 | 5 |
|
||
|
E.1768.1.0150.6
|
M 20 | 16 | 100 | 35.25 | 16,00 | 1,50 | 6 |
|
Customers have also seen
