Suitable for material
(Click for material suitability)P
General construction steel / free machining steel
| Material | <500 N/mm² | <700 N/mm² | <850 N/mm² | <1000 N/mm² | <1400 N/mm² |
|---|---|---|---|---|---|
| Suitability |
|
|
|
|
P
Heat treatable steel
| Material | <850 N/mm² | <1000 N/mm² | <1400 N/mm² | >1400 N/mm² |
|---|---|---|---|---|
| Suitability |
|
|
M
Rust and acid constant steels
| Material | <700 N/mm² | >700 N/mm² |
|---|---|---|
| Suitability |
|
|
K
Cast iron and cast iron alloy
| Material | Cast iron until 180 HB | Metallable cast iron | Cast iron with nodular graphite |
|---|---|---|---|
| Suitability |
N
Non-ferrous metal, plastics, graphite
| Material | Aluminium und AL-alloyed until 6% Si | Aluminium und AL-alloyed (under 12% Si) | Aluminium alloyed over 12% Si | Copper, brass, bronze, red brass | Plastics - thermoplast | Plastics - duroplast | GFK/CFK | Graphite |
|---|---|---|---|---|---|---|---|---|
| Suitability |
|
|
S
Special alloy and titanium
| Material | Inconel, Hastelloy, Nimonic, Monel | Titanium |
|---|---|---|
| Suitability |
H
Hardened steel
| Material | 45-55 HRC | 55-60 HRC | 60-65 HRC |
|---|---|---|---|
| Suitability |
| Product-Nr. |
|
|
|
|
|
|
|
in stock | Request | Alternatives |
|---|---|---|---|---|---|---|---|---|---|---|
| E.1655.1.M08X1.0 | M 8 X 1,00 | 7.6 | 90 | 10 | 6,0 | 4,90 | 1,00 |
|
||
| E.1655.1.M10X1.0 | M 10 X 1,00 | 9.6 | 90 | 10 | 7,0 | 5,50 | 1,00 |
|
||
| E.1655.1.M10X1.25 | M 10 X 1,25 | 9.45 | 100 | 15 | 7,0 | 5,50 | 1,25 |
|
||
| E.1655.1.M12X1.0 | M 12 X 1,00 | 11.6 | 100 | 10 | 9,0 | 7,00 | 1,00 |
|
||
| E.1655.1.M12X1.25 | M 12 X 1,25 | 11.45 | 100 | 15 | 9,0 | 7,00 | 1,25 |
|
||
| E.1655.1.M12X1.5 | M 12 X 1,50 | 11.35 | 100 | 15 | 9,0 | 7,00 | 1,50 |
|
||
| E.1655.1.M16X1.5 | M 16 X 1,50 | 15.35 | 100 | 15 | 12,0 | 9,00 | 1,50 |
|
||
| E.1655.1.M18X1.5 | M 18 X 1,50 | 17.35 | 110 | 17 | 14,0 | 11,00 | 1,50 |
|
||
| E.1655.1.M20X1.5 | M 20 X 1,50 | 19.35 | 125 | 17 | 16,0 | 12,00 | 1,50 |
|
Customers have also seen
