-
Solid carbide HPC end mills for Alumimium with corner protection radius and IC
E.7750.1IK -
- Cutting Data
Suitable for material
(Click for material suitability)P
General construction steel / free machining steel
| Material | <500 N/mm² | <700 N/mm² | <850 N/mm² | <1000 N/mm² | <1400 N/mm² |
|---|---|---|---|---|---|
| Suitability |
P
Heat treatable steel
| Material | <850 N/mm² | <1000 N/mm² | <1400 N/mm² | >1400 N/mm² |
|---|---|---|---|---|
| Suitability |
M
Rust and acid constant steels
| Material | <700 N/mm² | >700 N/mm² |
|---|---|---|
| Suitability |
K
Cast iron and cast iron alloy
| Material | Cast iron until 180 HB | Metallable cast iron | Cast iron with nodular graphite |
|---|---|---|---|
| Suitability |
N
Non-ferrous metal, plastics, graphite
| Material | Aluminium und AL-alloyed until 6% Si | Aluminium und AL-alloyed (under 12% Si) | Aluminium alloyed over 12% Si | Copper, brass, bronze, red brass | Plastics - thermoplast | Plastics - duroplast | GFK/CFK | Graphite |
|---|---|---|---|---|---|---|---|---|
| Suitability |
|
|
|
|
|
|
S
Special alloy and titanium
| Material | Inconel, Hastelloy, Nimonic, Monel | Titanium |
|---|---|---|
| Suitability |
H
Hardened steel
| Material | 45-55 HRC | 55-60 HRC | 60-65 HRC |
|---|---|---|---|
| Suitability |
available variants
E.7750.1IK.0300
3
57
8
4,0
2.5
0.13
18
E.7750.1IK.0400
4
57
11
4,0
3.5
0.18
21
E.7750.1IK.0600
6
57
13
6,0
5.5
0.2
21
E.7750.1IK.0800
8
63
21
8,0
7.5
0.25
27
E.7750.1IK.1000
10
72
22
10,0
9.5
0.3
32
E.7750.1IK.1200
12
83
26
12,0
11.5
0.3
38
E.7750.1IK.1600
16
92
36
16,0
15.5
0.4
44
1
1 from 1
Viewed