-
Solid carbide HPC end mills for Aluminium with corner protection radius, long
E.7750.1L -
- Cutting Data
Suitable for material
(Click for material suitability)P
General construction steel / free machining steel
| Material | <500 N/mm² | <700 N/mm² | <850 N/mm² | <1000 N/mm² | <1400 N/mm² |
|---|---|---|---|---|---|
| Suitability |
P
Heat treatable steel
| Material | <850 N/mm² | <1000 N/mm² | <1400 N/mm² | >1400 N/mm² |
|---|---|---|---|---|
| Suitability |
M
Rust and acid constant steels
| Material | <700 N/mm² | >700 N/mm² |
|---|---|---|
| Suitability |
K
Cast iron and cast iron alloy
| Material | Cast iron until 180 HB | Metallable cast iron | Cast iron with nodular graphite |
|---|---|---|---|
| Suitability |
N
Non-ferrous metal, plastics, graphite
| Material | Aluminium und AL-alloyed until 6% Si | Aluminium und AL-alloyed (under 12% Si) | Aluminium alloyed over 12% Si | Copper, brass, bronze, red brass | Plastics - thermoplast | Plastics - duroplast | GFK/CFK | Graphite |
|---|---|---|---|---|---|---|---|---|
| Suitability |
|
|
|
|
|
|
S
Special alloy and titanium
| Material | Inconel, Hastelloy, Nimonic, Monel | Titanium |
|---|---|---|
| Suitability |
H
Hardened steel
| Material | 45-55 HRC | 55-60 HRC | 60-65 HRC |
|---|---|---|---|
| Suitability |
available variants
E.7750.1L.0600
6
80
13
6,0
5.5
0.2
42
E.7750.1L.0600.050
6
80
13
6,0
5.5
0.5
42
E.7750.1L.0600.100
6
80
13
6,0
5.5
1
42
E.7750.1L.0600.150
6
80
13
6,0
5.5
1.5
42
E.7750.1L.0600.200
6
80
13
6,0
5.5
2
42
E.7750.1L.0800
8
100
21
8,0
7.5
0.25
58
E.7750.1L.0800.050
8
100
21
8,0
7.5
0.5
58
E.7750.1L.0800.100
8
100
21
8,0
7.5
1
58
E.7750.1L.0800.150
8
100
21
8,0
7.5
1.5
58
E.7750.1L.0800.200
8
100
21
8,0
7.5
2
58
Viewed