Solid carbide roughing end mills 45°, extra long
E.7816.1
Suitable for material
(Click for material suitability)P
General construction steel / free machining steel
| Material | <500 N/mm² | <700 N/mm² | <850 N/mm² | <1000 N/mm² | <1400 N/mm² |
|---|---|---|---|---|---|
| Suitability |
|
|
|
|
|
P
Heat treatable steel
| Material | <850 N/mm² | <1000 N/mm² | <1400 N/mm² | >1400 N/mm² |
|---|---|---|---|---|
| Suitability |
|
|
|
M
Rust and acid constant steels
| Material | <700 N/mm² | >700 N/mm² |
|---|---|---|
| Suitability |
|
K
Cast iron and cast iron alloy
| Material | Cast iron until 180 HB | Metallable cast iron | Cast iron with nodular graphite |
|---|---|---|---|
| Suitability |
|
|
|
N
Non-ferrous metal, plastics, graphite
| Material | Aluminium und AL-alloyed until 6% Si | Aluminium und AL-alloyed (under 12% Si) | Aluminium alloyed over 12% Si | Copper, brass, bronze, red brass | Plastics - thermoplast | Plastics - duroplast | GFK/CFK | Graphite |
|---|---|---|---|---|---|---|---|---|
| Suitability |
|
|
|
S
Special alloy and titanium
| Material | Inconel, Hastelloy, Nimonic, Monel | Titanium |
|---|---|---|
| Suitability |
H
Hardened steel
| Material | 45-55 HRC | 55-60 HRC | 60-65 HRC |
|---|---|---|---|
| Suitability |
| Product-Nr. |
|
|
|
|
|
|
|
in stock | Request | Alternatives |
|---|---|---|---|---|---|---|---|---|---|---|
|
E.7816.1.0600
|
6 | 0,40 | 5.7 | 80 | 22 | 40 | 6,0 |
|
||
|
E.7816.1.0800
|
8 | 0,40 | 7.4 | 100 | 27 | 50 | 8,0 |
|
||
|
E.7816.1.1000
|
10 | 0,40 | 9.2 | 100 | 32 | 60 | 10,0 |
|
||
|
E.7816.1.1200
|
12 | 0,40 | 11 | 120 | 42 | 60 | 12,0 |
|
||
|
E.7816.1.1600
|
16 | 0,40 | 15 | 150 | 52 | 100 | 16,0 |
|
||
|
E.7816.1.2000
|
20 | 0,40 | 19 | 150 | 62 | 100 | 20,0 |
|
||
|
E.7816.1.2500
|
25 | 0,40 | 24 | 150 | 82 | 100 | 25,0 |
|
Customers have also seen
