Solid carbide Primus roughing end mills 45°, long
E.7678.1
Suitable for material
(Click for material suitability)P
General construction steel / free machining steel
| Material | <500 N/mm² | <700 N/mm² | <850 N/mm² | <1000 N/mm² | <1400 N/mm² |
|---|---|---|---|---|---|
| Suitability |
|
|
|
|
|
P
Heat treatable steel
| Material | <850 N/mm² | <1000 N/mm² | <1400 N/mm² | >1400 N/mm² |
|---|---|---|---|---|
| Suitability |
|
|
|
M
Rust and acid constant steels
| Material | <700 N/mm² | >700 N/mm² |
|---|---|---|
| Suitability |
|
|
K
Cast iron and cast iron alloy
| Material | Cast iron until 180 HB | Metallable cast iron | Cast iron with nodular graphite |
|---|---|---|---|
| Suitability |
|
|
|
N
Non-ferrous metal, plastics, graphite
| Material | Aluminium und AL-alloyed until 6% Si | Aluminium und AL-alloyed (under 12% Si) | Aluminium alloyed over 12% Si | Copper, brass, bronze, red brass | Plastics - thermoplast | Plastics - duroplast | GFK/CFK | Graphite |
|---|---|---|---|---|---|---|---|---|
| Suitability |
S
Special alloy and titanium
| Material | Inconel, Hastelloy, Nimonic, Monel | Titanium |
|---|---|---|
| Suitability |
|
H
Hardened steel
| Material | 45-55 HRC | 55-60 HRC | 60-65 HRC |
|---|---|---|---|
| Suitability |
| Product-Nr. |
|
|
|
|
|
in stock | Request | Alternatives |
|---|---|---|---|---|---|---|---|---|
| E.7678.1.0400 | 3 | 4 | 57 | 11 | 6,0 |
|
||
| E.7678.1.0500 | 4 | 5 | 57 | 13 | 6,0 |
|
||
| E.7678.1.0600 | 4 | 6 | 57 | 16 | 6,0 |
|
||
| E.7678.1.0700 | 4 | 7 | 63 | 16 | 8,0 |
|
||
| E.7678.1.0800 | 4 | 8 | 63 | 16 | 8,0 |
|
||
| E.7678.1.0900 | 4 | 9 | 72 | 19 | 10,0 |
|
||
| E.7678.1.1000 | 4 | 10 | 72 | 22 | 10,0 |
|
||
| E.7678.1.1200 | 4 | 12 | 83 | 26 | 12,0 |
|
||
| E.7678.1.1400 | 5 | 14 | 83 | 26 | 14,0 |
|
||
| E.7678.1.1600 | 5 | 16 | 92 | 32 | 16,0 |
|
||
| E.7678.1.2000 | 6 | 20 | 104 | 38 | 20,0 |
|
||
| E.7678.1.2500 | 6 | 25 | 110 | 45 | 25,0 |
|
Customers have also seen
