Solid carbide universal micro end mills 30°, short
E.7601.1
Suitable for material
(Click for material suitability)P
General construction steel / free machining steel
| Material | <500 N/mm² | <700 N/mm² | <850 N/mm² | <1000 N/mm² | <1400 N/mm² |
|---|---|---|---|---|---|
| Suitability |
|
|
|
|
|
P
Heat treatable steel
| Material | <850 N/mm² | <1000 N/mm² | <1400 N/mm² | >1400 N/mm² |
|---|---|---|---|---|
| Suitability |
|
|
|
|
M
Rust and acid constant steels
| Material | <700 N/mm² | >700 N/mm² |
|---|---|---|
| Suitability |
|
|
K
Cast iron and cast iron alloy
| Material | Cast iron until 180 HB | Metallable cast iron | Cast iron with nodular graphite |
|---|---|---|---|
| Suitability |
|
|
|
N
Non-ferrous metal, plastics, graphite
| Material | Aluminium und AL-alloyed until 6% Si | Aluminium und AL-alloyed (under 12% Si) | Aluminium alloyed over 12% Si | Copper, brass, bronze, red brass | Plastics - thermoplast | Plastics - duroplast | GFK/CFK | Graphite |
|---|---|---|---|---|---|---|---|---|
| Suitability |
|
|
|
|
|
S
Special alloy and titanium
| Material | Inconel, Hastelloy, Nimonic, Monel | Titanium |
|---|---|---|
| Suitability |
H
Hardened steel
| Material | 45-55 HRC | 55-60 HRC | 60-65 HRC |
|---|---|---|---|
| Suitability |
| Product-Nr. |
|
|
|
|
in stock | Request | Alternatives |
|---|---|---|---|---|---|---|---|
| E.7601.1.0020 | 0.2 | 39 | 0.5 | 3,0 |
|
||
| E.7601.1.0030 | 0.3 | 39 | 1 | 3,0 |
|
||
| E.7601.1.0040 | 0.4 | 39 | 1 | 3,0 |
|
||
| E.7601.1.0050 | 0.5 | 39 | 1.5 | 3,0 |
|
||
| E.7601.1.0060 | 0.6 | 39 | 1.5 | 3,0 |
|
||
| E.7601.1.0070 | 0.7 | 39 | 2 | 3,0 |
|
||
| E.7601.1.0080 | 0.8 | 39 | 2 | 3,0 |
|
||
| E.7601.1.0090 | 0.9 | 39 | 2.5 | 3,0 |
|
||
| E.7601.1.0100 | 1 | 39 | 3 | 3,0 |
|
||
| E.7601.1.0120 | 1.2 | 39 | 4 | 3,0 |
|
||
| E.7601.1.0130 | 1.3 | 39 | 4 | 3,0 |
|
||
| E.7601.1.0140 | 1.4 | 39 | 4 | 3,0 |
|
||
| E.7601.1.0150 | 1.5 | 39 | 4 | 3,0 |
|
||
| E.7601.1.0160 | 1.6 | 39 | 4 | 3,0 |
|
||
| E.7601.1.0170 | 1.7 | 39 | 4 | 3,0 |
|
||
| E.7601.1.0180 | 1.8 | 39 | 5 | 3,0 |
|
||
| E.7601.1.0190 | 1.9 | 39 | 5 | 3,0 |
|
||
| E.7601.1.0200 | 2 | 39 | 5 | 3,0 |
|
