VHM-HPC-Superstar-Fräser (ungleiche T.) mit Eckenradius
E.7609.1
Geeignet für Material
(Anklicken für Materialeignung)P
Allgemeine Baustähle/Automatenstähle
| Material | <500 N/mm² | <700 N/mm² | <850 N/mm² | <1000 N/mm² | <1400 N/mm² |
|---|---|---|---|---|---|
| Eignung |
|
|
|
|
|
P
Vergütungsstähle
| Material | <850 N/mm² | <1000 N/mm² | <1400 N/mm² | >1400 N/mm² |
|---|---|---|---|---|
| Eignung |
|
|
|
|
M
Rost- und säurebeständige Stähle
| Material | <700 N/mm² | >700 N/mm² |
|---|---|---|
| Eignung |
|
|
K
Gusseisen und Gusseisenlegierungen
| Material | Gusseisen bis 180 HB | Temper-<br>guss | Gusseisen mit Kugel-<br>graphit |
|---|---|---|---|
| Eignung |
|
|
|
N
Ne-Metalle, Kunststoffe, Graphit
| Material | AL & AL-Legierungen bis 6% Si | AL & AL-Legierungen unter 12% Si | AL-Legierungen über 12% Si | Kupfer, Messing, Bronze, Rotguss | Kunststoff- Thermoplaste | Kunststoff- Duroplaste | GFK/CFK | Graphit |
|---|---|---|---|---|---|---|---|---|
| Eignung |
S
Sonderlegierungen & Titan
| Material | Inconel, Hastelloy, Nimonic, Monel | Titan |
|---|---|---|
| Eignung |
|
|
H
Gehärteter Stahl
| Material | 45-55 HRC | 55-60 HRC | 60-65 HRC |
|---|---|---|---|
| Eignung |
| Artikel-Nr. |
|
|
|
|
|
auf Lager | Anfrage | Alternativen |
|---|---|---|---|---|---|---|---|---|
| E.7609.1.0400.025 | 0.25 | 4 | 57 | 11 | 6,0 |
|
||
| E.7609.1.0400.050 | 0.5 | 4 | 57 | 11 | 6,0 |
|
||
| E.7609.1.0400.100 | 1 | 4 | 57 | 11 | 6,0 |
|
||
| E.7609.1.0500.050 | 0.5 | 5 | 57 | 13 | 6,0 |
|
||
| E.7609.1.0500.100 | 1 | 5 | 57 | 13 | 6,0 |
|
||
| E.7609.1.0500.150 | 1.5 | 5 | 57 | 13 | 6,0 |
|
||
| E.7609.1.0600.050 | 0.5 | 6 | 57 | 13 | 6,0 |
|
||
| E.7609.1.0600.100 | 1 | 6 | 57 | 13 | 6,0 |
|
||
| E.7609.1.0600.150 | 1.5 | 6 | 57 | 13 | 6,0 |
|
||
| E.7609.1.0600.200 | 2 | 6 | 57 | 13 | 6,0 |
|
||
| E.7609.1.0800.050 | 0.5 | 8 | 63 | 19 | 8,0 |
|
||
| E.7609.1.0800.100 | 1 | 8 | 63 | 19 | 8,0 |
|
||
| E.7609.1.0800.150 | 1.5 | 8 | 63 | 19 | 8,0 |
|
||
| E.7609.1.0800.200 | 2 | 8 | 63 | 19 | 8,0 |
|
||
| E.7609.1.1000.050 | 0.5 | 10 | 72 | 22 | 10,0 |
|
||
| E.7609.1.1000.100 | 1 | 10 | 72 | 22 | 10,0 |
|
||
| E.7609.1.1000.150 | 1.5 | 10 | 72 | 22 | 10,0 |
|
||
| E.7609.1.1000.200 | 2 | 10 | 72 | 22 | 10,0 |
|
||
| E.7609.1.1200.050 | 0.5 | 12 | 83 | 26 | 12,0 |
|
||
| E.7609.1.1200.100 | 1 | 12 | 83 | 26 | 12,0 |
|
||
| E.7609.1.1200.150 | 1.5 | 12 | 83 | 26 | 12,0 |
|
||
| E.7609.1.1200.200 | 2 | 12 | 83 | 26 | 12,0 |
|
||
| E.7609.1.1400.100 | 1 | 14 | 83 | 26 | 14,0 |
|
||
| E.7609.1.1400.200 | 2 | 14 | 83 | 26 | 14,0 |
|
||
| E.7609.1.1600.100 | 1 | 16 | 92 | 32 | 16,0 |
|
||
| E.7609.1.1600.150 | 1.5 | 16 | 92 | 32 | 16,0 |
|
||
| E.7609.1.1600.200 | 2 | 16 | 92 | 32 | 16,0 |
|
||
| E.7609.1.1600.250 | 2.5 | 16 | 92 | 32 | 16,0 |
|
||
| E.7609.1.1800.150 | 1.5 | 18 | 92 | 32 | 18,0 |
|
||
| E.7609.1.1800.250 | 2.5 | 18 | 92 | 32 | 18,0 |
|
||
| E.7609.1.2000.100 | 1 | 20 | 104 | 38 | 20,0 |
|
||
| E.7609.1.2000.150 | 1.5 | 20 | 104 | 38 | 20,0 |
|
||
| E.7609.1.2000.200 | 2 | 20 | 104 | 38 | 20,0 |
|
||
| E.7609.1.2000.250 | 2.5 | 20 | 104 | 38 | 20,0 |
|
||
| E.7609.1.2000.300 | 3 | 20 | 104 | 38 | 20,0 |
|
||
| E.7609.1.2000.400 | 4 | 20 | 104 | 38 | 20,0 |
|
||
| E.7609.1.2000.500 | 5 | 20 | 104 | 38 | 20,0 |
|
