Suitable for material
(Click for material suitability)P
General construction steel / free machining steel
| Material | <500 N/mm² | <700 N/mm² | <850 N/mm² | <1000 N/mm² | <1400 N/mm² |
|---|---|---|---|---|---|
| Suitability |
P
Heat treatable steel
| Material | <850 N/mm² | <1000 N/mm² | <1400 N/mm² | >1400 N/mm² |
|---|---|---|---|---|
| Suitability |
M
Rust and acid constant steels
| Material | <700 N/mm² | >700 N/mm² |
|---|---|---|
| Suitability |
K
Cast iron and cast iron alloy
| Material | Cast iron until 180 HB | Metallable cast iron | Cast iron with nodular graphite |
|---|---|---|---|
| Suitability |
N
Non-ferrous metal, plastics, graphite
| Material | Aluminium und AL-alloyed until 6% Si | Aluminium und AL-alloyed (under 12% Si) | Aluminium alloyed over 12% Si | Copper, brass, bronze, red brass | Plastics - thermoplast | Plastics - duroplast | GFK/CFK | Graphite |
|---|---|---|---|---|---|---|---|---|
| Suitability |
S
Special alloy and titanium
| Material | Inconel, Hastelloy, Nimonic, Monel | Titanium |
|---|---|---|
| Suitability |
H
Hardened steel
| Material | 45-55 HRC | 55-60 HRC | 60-65 HRC |
|---|---|---|---|
| Suitability |
| Product-Nr. |
|
|
|
|
in stock | Request | Alternatives |
|---|---|---|---|---|---|---|---|
|
E.1693.0.M03
|
M 3 | 3 | 20 x 5 | 0,50 |
|
||
|
E.1693.0.M035
|
M 3,5 | 3 | 20 x 5 | 0,60 |
|
||
|
E.1693.0.M04
|
M 4 | 3 | 20 x 5 | 0,70 |
|
||
|
E.1693.0.M05
|
M 5 | 4 | 20 x 7 | 0,80 |
|
||
|
E.1693.0.M06
|
M 6 | 4 | 20 x 7 | 1,00 |
|
||
|
E.1693.0.M07
|
M 7 | 4 | 25 x 9 | 1,00 |
|
||
|
E.1693.0.M08
|
M 8 | 5 | 25 x 9 | 1,25 |
|
||
|
E.1693.0.M10
|
M 10 | 5 | 30 x 11 | 1,50 |
|
||
|
E.1693.0.M12
|
M 12 | 5 | 38 x 14 | 1,75 |
|
||
|
E.1693.0.M14
|
M 14 | 5 | 38 x 14 | 2,00 |
|
||
|
E.1693.0.M16
|
M 16 | 5 | 45 x 18 | 2,00 |
|
||
|
E.1693.0.M18
|
M 18 | 5 | 45 x 18 | 2,50 |
|
||
|
E.1693.0.M20
|
M 20 | 5 | 45 x 18 | 2,50 |
|
Customers have also seen
