-
Solid carbide ball nose micro end mills 30° for moulds
E.7800.1 -
- Cutting Data
Suitable for material
(Click for material suitability)P
General construction steel / free machining steel
| Material | <500 N/mm² | <700 N/mm² | <850 N/mm² | <1000 N/mm² | <1400 N/mm² |
|---|---|---|---|---|---|
| Suitability |
|
|
|
|
|
P
Heat treatable steel
| Material | <850 N/mm² | <1000 N/mm² | <1400 N/mm² | >1400 N/mm² |
|---|---|---|---|---|
| Suitability |
|
|
|
|
M
Rust and acid constant steels
| Material | <700 N/mm² | >700 N/mm² |
|---|---|---|
| Suitability |
K
Cast iron and cast iron alloy
| Material | Cast iron until 180 HB | Metallable cast iron | Cast iron with nodular graphite |
|---|---|---|---|
| Suitability |
|
|
|
N
Non-ferrous metal, plastics, graphite
| Material | Aluminium und AL-alloyed until 6% Si | Aluminium und AL-alloyed (under 12% Si) | Aluminium alloyed over 12% Si | Copper, brass, bronze, red brass | Plastics - thermoplast | Plastics - duroplast | GFK/CFK | Graphite |
|---|---|---|---|---|---|---|---|---|
| Suitability |
S
Special alloy and titanium
| Material | Inconel, Hastelloy, Nimonic, Monel | Titanium |
|---|---|---|
| Suitability |
H
Hardened steel
| Material | 45-55 HRC | 55-60 HRC | 60-65 HRC |
|---|---|---|---|
| Suitability |
|
|
|
available variants
E.7800.1.0030.01
0.3
40
0.3
4,0
0.28
1
0.15
E.7800.1.0030.02
0.3
40
0.3
4,0
0.28
2
0.15
E.7800.1.0030.05
0.3
40
0.3
4,0
0.28
5
0.15
E.7800.1.0040.02
0.4
40
0.4
4,0
0.38
2
0.2
E.7800.1.0050.02
0.5
50
0.5
6,0
0.48
2
0.25
E.7800.1.0050.02.SD4
0.5
45
0.5
4,0
0.48
2
0.25
E.7800.1.0050.04
0.5
50
0.5
6,0
0.48
4
0.25
E.7800.1.0050.04.SD4
0.5
45
0.5
4,0
0.48
4
0.25
E.7800.1.0050.06
0.5
50
0.5
6,0
0.48
6
0.25
E.7800.1.0050.06.SD4
0.5
45
0.5
4,0
0.48
6
0.25
Viewed