-
Solid carbide end mills 45° with corner radius for moulds
E.7743.1 -
- Cutting Data
Suitable for material
(Click for material suitability)P
General construction steel / free machining steel
| Material | <500 N/mm² | <700 N/mm² | <850 N/mm² | <1000 N/mm² | <1400 N/mm² |
|---|---|---|---|---|---|
| Suitability |
|
|
|
|
P
Heat treatable steel
| Material | <850 N/mm² | <1000 N/mm² | <1400 N/mm² | >1400 N/mm² |
|---|---|---|---|---|
| Suitability |
|
|
|
M
Rust and acid constant steels
| Material | <700 N/mm² | >700 N/mm² |
|---|---|---|
| Suitability |
K
Cast iron and cast iron alloy
| Material | Cast iron until 180 HB | Metallable cast iron | Cast iron with nodular graphite |
|---|---|---|---|
| Suitability |
|
|
|
N
Non-ferrous metal, plastics, graphite
| Material | Aluminium und AL-alloyed until 6% Si | Aluminium und AL-alloyed (under 12% Si) | Aluminium alloyed over 12% Si | Copper, brass, bronze, red brass | Plastics - thermoplast | Plastics - duroplast | GFK/CFK | Graphite |
|---|---|---|---|---|---|---|---|---|
| Suitability |
S
Special alloy and titanium
| Material | Inconel, Hastelloy, Nimonic, Monel | Titanium |
|---|---|---|
| Suitability |
H
Hardened steel
| Material | 45-55 HRC | 55-60 HRC | 60-65 HRC |
|---|---|---|---|
| Suitability |
|
|
|
available variants
E.7743.1.0200.03
57
6
2
6,0
1.9
0.3
12
E.7743.1.0300.05
57
8
3
6,0
2.8
0.5
15
E.7743.1.0400.02
57
11
4
6,0
3.6
0.2
21
E.7743.1.0400.03
57
11
4
6,0
3.6
0.3
21
E.7743.1.0400.05
57
11
4
6,0
3.6
0.5
21
E.7743.1.0400.10
57
11
4
6,0
3.6
1
21
E.7743.1.0500.02
57
12
5
6,0
4.6
0.2
21
E.7743.1.0500.05
57
12
5
6,0
4.6
0.5
21
E.7743.1.0500.10
57
12
5
6,0
4.6
1
21
E.7743.1.0600.01
57
12
6
6,0
5.5
0.1
21
Viewed