-
Solid carbide HPC Superstar end mills for Inox, short
E.7675VK.1 -
- Cutting Data
Suitable for material
(Click for material suitability)P
General construction steel / free machining steel
| Material | <500 N/mm² | <700 N/mm² | <850 N/mm² | <1000 N/mm² | <1400 N/mm² |
|---|---|---|---|---|---|
| Suitability |
P
Heat treatable steel
| Material | <850 N/mm² | <1000 N/mm² | <1400 N/mm² | >1400 N/mm² |
|---|---|---|---|---|
| Suitability |
M
Rust and acid constant steels
| Material | <700 N/mm² | >700 N/mm² |
|---|---|---|
| Suitability |
|
|
K
Cast iron and cast iron alloy
| Material | Cast iron until 180 HB | Metallable cast iron | Cast iron with nodular graphite |
|---|---|---|---|
| Suitability |
N
Non-ferrous metal, plastics, graphite
| Material | Aluminium und AL-alloyed until 6% Si | Aluminium und AL-alloyed (under 12% Si) | Aluminium alloyed over 12% Si | Copper, brass, bronze, red brass | Plastics - thermoplast | Plastics - duroplast | GFK/CFK | Graphite |
|---|---|---|---|---|---|---|---|---|
| Suitability |
S
Special alloy and titanium
| Material | Inconel, Hastelloy, Nimonic, Monel | Titanium |
|---|---|---|
| Suitability |
|
|
H
Hardened steel
| Material | 45-55 HRC | 55-60 HRC | 60-65 HRC |
|---|---|---|---|
| Suitability |
available variants
E.7675VK.1.0300
3
54
6
6,0
0.13
E.7675VK.1.0400
4
54
8
6,0
0.18
E.7675VK.1.0500
5
54
9
6,0
0.2
E.7675VK.1.0600
6
54
10
6,0
0.2
E.7675VK.1.0800
8
58
12
8,0
0.25
E.7675VK.1.0900
9
66
14
10,0
0.3
E.7675VK.1.1000
10
66
14
10,0
0.3
E.7675VK.1.1200
12
73
16
12,0
0.3
E.7675VK.1.1600
16
82
22
16,0
0.4
E.7675VK.1.2000
20
92
26
20,0
0.5
1
1 from 1
Viewed