-
Solid carbide HPC Superstar Plus end mills (unequal pitch), reduced neck, with corner radius
E.7768.1 -
- Cutting Data
Suitable for material
(Click for material suitability)P
General construction steel / free machining steel
| Material | <500 N/mm² | <700 N/mm² | <850 N/mm² | <1000 N/mm² | <1400 N/mm² |
|---|---|---|---|---|---|
| Suitability |
|
|
|
P
Heat treatable steel
| Material | <850 N/mm² | <1000 N/mm² | <1400 N/mm² | >1400 N/mm² |
|---|---|---|---|---|
| Suitability |
|
|
|
|
M
Rust and acid constant steels
| Material | <700 N/mm² | >700 N/mm² |
|---|---|---|
| Suitability |
K
Cast iron and cast iron alloy
| Material | Cast iron until 180 HB | Metallable cast iron | Cast iron with nodular graphite |
|---|---|---|---|
| Suitability |
|
|
|
N
Non-ferrous metal, plastics, graphite
| Material | Aluminium und AL-alloyed until 6% Si | Aluminium und AL-alloyed (under 12% Si) | Aluminium alloyed over 12% Si | Copper, brass, bronze, red brass | Plastics - thermoplast | Plastics - duroplast | GFK/CFK | Graphite |
|---|---|---|---|---|---|---|---|---|
| Suitability |
S
Special alloy and titanium
| Material | Inconel, Hastelloy, Nimonic, Monel | Titanium |
|---|---|---|
| Suitability |
|
H
Hardened steel
| Material | 45-55 HRC | 55-60 HRC | 60-65 HRC |
|---|---|---|---|
| Suitability |
available variants
E.7768.1.0300
3
57
8
6,0
2.8
21
0.13
4
E.7768.1.0400
4
57
8
6,0
3.6
21
0.18
4
E.7768.1.0500
5
57
13
6,0
4.6
21
0.2
4
E.7768.1.0600
6
57
13
6,0
5.5
21
0.2
5
E.7768.1.0800
8
63
19
8,0
7.5
27
0.25
5
E.7768.1.1000
10
72
22
10,0
9.5
32
0.3
5
E.7768.1.1200
12
83
26
12,0
11.5
38
0.3
5
E.7768.1.1400
14
83
26
14,0
13.5
38
0.3
5
E.7768.1.1600
16
92
32
16,0
15.5
44
0.4
5
E.7768.1.2000
20
104
38
20,0
19.5
54
0.5
5
1
1 from 1
Viewed