Solid carbide HPC disposable end mills, extra short
E.7638HK.1
Suitable for material
(Click for material suitability)P
General construction steel / free machining steel
| Material | <500 N/mm² | <700 N/mm² | <850 N/mm² | <1000 N/mm² | <1400 N/mm² |
|---|---|---|---|---|---|
| Suitability |
|
|
|
|
|
P
Heat treatable steel
| Material | <850 N/mm² | <1000 N/mm² | <1400 N/mm² | >1400 N/mm² |
|---|---|---|---|---|
| Suitability |
|
|
|
|
M
Rust and acid constant steels
| Material | <700 N/mm² | >700 N/mm² |
|---|---|---|
| Suitability |
|
|
K
Cast iron and cast iron alloy
| Material | Cast iron until 180 HB | Metallable cast iron | Cast iron with nodular graphite |
|---|---|---|---|
| Suitability |
|
|
|
N
Non-ferrous metal, plastics, graphite
| Material | Aluminium und AL-alloyed until 6% Si | Aluminium und AL-alloyed (under 12% Si) | Aluminium alloyed over 12% Si | Copper, brass, bronze, red brass | Plastics - thermoplast | Plastics - duroplast | GFK/CFK | Graphite |
|---|---|---|---|---|---|---|---|---|
| Suitability |
S
Special alloy and titanium
| Material | Inconel, Hastelloy, Nimonic, Monel | Titanium |
|---|---|---|
| Suitability |
H
Hardened steel
| Material | 45-55 HRC | 55-60 HRC | 60-65 HRC |
|---|---|---|---|
| Suitability |
| Product-Nr. |
|
|
|
|
|
in stock | Request | Alternatives |
|---|---|---|---|---|---|---|---|---|
|
E.7638HK.1.0100
|
1 | 0,13 | 39 | 2 | 6,0 |
|
||
|
E.7638HK.1.0150
|
1.5 | 0,13 | 39 | 3 | 6,0 |
|
||
|
E.7638HK.1.0200
|
2 | 0,13 | 39 | 3 | 6,0 |
|
||
|
E.7638HK.1.0250
|
2.5 | 0,13 | 39 | 3 | 6,0 |
|
||
|
E.7638HK.1.0280
|
2.8 | 0,13 | 39 | 5 | 6,0 |
|
||
|
E.7638HK.1.0300
|
3 | 0,13 | 39 | 5 | 6,0 |
|
||
|
E.7638HK.1.0380
|
3.8 | 0,13 | 39 | 7 | 6,0 |
|
||
|
E.7638HK.1.0400
|
4 | 0,18 | 39 | 7 | 6,0 |
|
||
|
E.7638HK.1.0480
|
4.8 | 0,18 | 39 | 8 | 6,0 |
|
||
|
E.7638HK.1.0500
|
5 | 0,20 | 39 | 8 | 6,0 |
|
||
|
E.7638HK.1.0570
|
5.7 | 0,20 | 39 | 8 | 6,0 |
|
||
|
E.7638HK.1.0600
|
6 | 0,20 | 39 | 8 | 6,0 |
|
||
|
E.7638HK.1.0670
|
6.7 | 0,20 | 43 | 11 | 8,0 |
|
||
|
E.7638HK.1.0700
|
7 | 0,25 | 43 | 11 | 8,0 |
|
||
|
E.7638HK.1.0770
|
7.7 | 0,25 | 43 | 11 | 8,0 |
|
||
|
E.7638HK.1.0800
|
8 | 0,25 | 43 | 11 | 8,0 |
|
||
|
E.7638HK.1.0870
|
8.7 | 0,25 | 50 | 13 | 10,0 |
|
||
|
E.7638HK.1.0900
|
9 | 0,30 | 50 | 13 | 10,0 |
|
||
|
E.7638HK.1.0970
|
9.7 | 0,30 | 50 | 13 | 10,0 |
|
||
|
E.7638HK.1.1000
|
10 | 0,30 | 50 | 13 | 10,0 |
|
||
|
E.7638HK.1.1170
|
11.7 | 0,30 | 55 | 15 | 12,0 |
|
||
|
E.7638HK.1.1200
|
12 | 0,30 | 55 | 15 | 12,0 |
|
||
|
E.7638HK.1.1370
|
13.7 | 0,30 | 58 | 15 | 14,0 |
|
||
|
E.7638HK.1.1400
|
14 | 0,30 | 58 | 15 | 14,0 |
|
||
|
E.7638HK.1.1570
|
15.7 | 0,30 | 65 | 18 | 16,0 |
|
||
|
E.7638HK.1.1600
|
16 | 0,40 | 65 | 18 | 16,0 |
|
Customers have also seen
