Solid carbide universal drill slot end mills 30°, with undersize
E.7625.1
Suitable for material
(Click for material suitability)P
General construction steel / free machining steel
| Material | <500 N/mm² | <700 N/mm² | <850 N/mm² | <1000 N/mm² | <1400 N/mm² |
|---|---|---|---|---|---|
| Suitability |
|
|
|
|
|
P
Heat treatable steel
| Material | <850 N/mm² | <1000 N/mm² | <1400 N/mm² | >1400 N/mm² |
|---|---|---|---|---|
| Suitability |
|
|
|
M
Rust and acid constant steels
| Material | <700 N/mm² | >700 N/mm² |
|---|---|---|
| Suitability |
|
K
Cast iron and cast iron alloy
| Material | Cast iron until 180 HB | Metallable cast iron | Cast iron with nodular graphite |
|---|---|---|---|
| Suitability |
|
|
|
N
Non-ferrous metal, plastics, graphite
| Material | Aluminium und AL-alloyed until 6% Si | Aluminium und AL-alloyed (under 12% Si) | Aluminium alloyed over 12% Si | Copper, brass, bronze, red brass | Plastics - thermoplast | Plastics - duroplast | GFK/CFK | Graphite |
|---|---|---|---|---|---|---|---|---|
| Suitability |
|
|
|
|
|
S
Special alloy and titanium
| Material | Inconel, Hastelloy, Nimonic, Monel | Titanium |
|---|---|---|
| Suitability |
H
Hardened steel
| Material | 45-55 HRC | 55-60 HRC | 60-65 HRC |
|---|---|---|---|
| Suitability |
| Product-Nr. |
|
|
|
|
in stock | Request | Alternatives |
|---|---|---|---|---|---|---|---|
| E.7625.1.0180 | 1.8 | 50 | 3 | 6,0 |
|
||
| E.7625.1.0280 | 2.8 | 50 | 4 | 6,0 |
|
||
| E.7625.1.0380 | 3.8 | 50 | 5 | 6,0 |
|
||
| E.7625.1.0480 | 4.8 | 50 | 6 | 6,0 |
|
||
| E.7625.1.0580 | 5.8 | 50 | 7 | 6,0 |
|
||
| E.7625.1.0670 | 6.7 | 58 | 8 | 8,0 |
|
||
| E.7625.1.0780 | 7.8 | 58 | 10 | 8,0 |
|
||
| E.7625.1.0870 | 8.7 | 72 | 10 | 10,0 |
|
||
| E.7625.1.0970 | 9.7 | 72 | 11 | 10,0 |
|
