Solid carbide circular thread milling cutter for milling into solid, IC, DIN13, coated
E.1812.1
Suitable for material
(Click for material suitability)P
General construction steel / free machining steel
| Material | <500 N/mm² | <700 N/mm² | <850 N/mm² | <1000 N/mm² | <1400 N/mm² |
|---|---|---|---|---|---|
| Suitability |
|
P
Heat treatable steel
| Material | <850 N/mm² | <1000 N/mm² | <1400 N/mm² | >1400 N/mm² |
|---|---|---|---|---|
| Suitability |
|
|
M
Rust and acid constant steels
| Material | <700 N/mm² | >700 N/mm² |
|---|---|---|
| Suitability |
|
|
K
Cast iron and cast iron alloy
| Material | Cast iron until 180 HB | Metallable cast iron | Cast iron with nodular graphite |
|---|---|---|---|
| Suitability |
|
|
N
Non-ferrous metal, plastics, graphite
| Material | Aluminium und AL-alloyed until 6% Si | Aluminium und AL-alloyed (under 12% Si) | Aluminium alloyed over 12% Si | Copper, brass, bronze, red brass | Plastics - thermoplast | Plastics - duroplast | GFK/CFK | Graphite |
|---|---|---|---|---|---|---|---|---|
| Suitability |
S
Special alloy and titanium
| Material | Inconel, Hastelloy, Nimonic, Monel | Titanium |
|---|---|---|
| Suitability |
|
H
Hardened steel
| Material | 45-55 HRC | 55-60 HRC | 60-65 HRC |
|---|---|---|---|
| Suitability |
|
|
|
| Product-Nr. |
|
|
|
|
|
|
|
|
in stock | Request | Alternatives |
|---|---|---|---|---|---|---|---|---|---|---|---|
|
E.1812.1.M06
|
M 6 | 4.6 | 60 | 3 | 15 | 6 | WN | 1,0 |
|
||
|
E.1812.1.M08
|
M 8 | 6.2 | 80 | 3.75 | 20 | 8 | WN | 1,25 |
|
||
|
E.1812.1.M10
|
M 10 | 7.5 | 80 | 4.5 | 25 | 10 | WN | 1,5 |
|
||
|
E.1812.1.M12
|
M 12 | 9 | 80 | 5.25 | 30 | 10 | WN | 1,75 |
|
||
|
E.1812.1.M14
|
M 14 | 10.5 | 100 | 6 | 35 | 12 | WN | 2,0 |
|
||
|
E.1812.1.M16
|
M 16 | 11.5 | 100 | 6 | 40 | 12 | WN | 2,0 |
|
Customers have also seen
