Suitable for material
(Click for material suitability)P
General construction steel / free machining steel
| Material | <500 N/mm² | <700 N/mm² | <850 N/mm² | <1000 N/mm² | <1400 N/mm² |
|---|---|---|---|---|---|
| Suitability |
|
|
|
|
|
P
Heat treatable steel
| Material | <850 N/mm² | <1000 N/mm² | <1400 N/mm² | >1400 N/mm² |
|---|---|---|---|---|
| Suitability |
|
|
|
|
M
Rust and acid constant steels
| Material | <700 N/mm² | >700 N/mm² |
|---|---|---|
| Suitability |
|
|
K
Cast iron and cast iron alloy
| Material | Cast iron until 180 HB | Metallable cast iron | Cast iron with nodular graphite |
|---|---|---|---|
| Suitability |
|
|
|
N
Non-ferrous metal, plastics, graphite
| Material | Aluminium und AL-alloyed until 6% Si | Aluminium und AL-alloyed (under 12% Si) | Aluminium alloyed over 12% Si | Copper, brass, bronze, red brass | Plastics - thermoplast | Plastics - duroplast | GFK/CFK | Graphite |
|---|---|---|---|---|---|---|---|---|
| Suitability |
|
|
|
|
|
S
Special alloy and titanium
| Material | Inconel, Hastelloy, Nimonic, Monel | Titanium |
|---|---|---|
| Suitability |
|
|
H
Hardened steel
| Material | 45-55 HRC | 55-60 HRC | 60-65 HRC |
|---|---|---|---|
| Suitability |
| Product-Nr. |
|
|
|
|
|
|
in stock | Request | Alternatives |
|---|---|---|---|---|---|---|---|---|---|
| E.3638.0.0050 | 0,80 | 3,24 | 0.5 | 31.5 | 5.5 | 3,15 |
|
||
| E.3638.0.0080 | 1,10 | 3,37 | 0.8 | 31.5 | 5.5 | 3,15 |
|
||
| E.3638.0.0100 | 1,30 | 3,45 | 1 | 31.5 | 6 | 3,15 |
|
||
| E.3638.0.0125 | 1,60 | 3,60 | 1.25 | 31.5 | 6 | 3,15 |
|
||
| E.3638.0.0160 | 2,00 | 4,54 | 1.6 | 35.5 | 7.5 | 4,0 |
|
||
| E.3638.0.0200 | 2,50 | 5,68 | 2 | 40 | 9.5 | 5,0 |
|
||
| E.3638.0.0250 | 3,10 | 7,11 | 2.5 | 45 | 12 | 6,3 |
|
||
| E.3638.0.0315 | 3,90 | 9,01 | 3.15 | 50 | 15 | 8,0 |
|
||
| E.3638.0.0400 | 5,00 | 11,35 | 4 | 56 | 19 | 10,0 |
|
||
| E.3638.0.0500 | 6,30 | 14,24 | 5 | 63 | 23.5 | 12,5 |
|
||
| E.3638.0.0630 | 8,00 | 18,22 | 6.3 | 71 | 30 | 16,0 |
|
Customers have also seen
