Solid carbide ball nose micro end mills 30° for moulds
E.7800.1
Suitable for material
(Click for material suitability)P
General construction steel / free machining steel
| Material | <500 N/mm² | <700 N/mm² | <850 N/mm² | <1000 N/mm² | <1400 N/mm² |
|---|---|---|---|---|---|
| Suitability |
|
|
|
|
|
P
Heat treatable steel
| Material | <850 N/mm² | <1000 N/mm² | <1400 N/mm² | >1400 N/mm² |
|---|---|---|---|---|
| Suitability |
|
|
|
|
M
Rust and acid constant steels
| Material | <700 N/mm² | >700 N/mm² |
|---|---|---|
| Suitability |
K
Cast iron and cast iron alloy
| Material | Cast iron until 180 HB | Metallable cast iron | Cast iron with nodular graphite |
|---|---|---|---|
| Suitability |
|
|
|
N
Non-ferrous metal, plastics, graphite
| Material | Aluminium und AL-alloyed until 6% Si | Aluminium und AL-alloyed (under 12% Si) | Aluminium alloyed over 12% Si | Copper, brass, bronze, red brass | Plastics - thermoplast | Plastics - duroplast | GFK/CFK | Graphite |
|---|---|---|---|---|---|---|---|---|
| Suitability |
S
Special alloy and titanium
| Material | Inconel, Hastelloy, Nimonic, Monel | Titanium |
|---|---|---|
| Suitability |
H
Hardened steel
| Material | 45-55 HRC | 55-60 HRC | 60-65 HRC |
|---|---|---|---|
| Suitability |
|
|
|
| Product-Nr. |
|
|
|
|
|
|
|
in stock | Request | Alternatives |
|---|---|---|---|---|---|---|---|---|---|---|
|
E.7800.1.0030.01
|
0.3 | 0.15 | 0.28 | 40 | 0.3 | 1 | 4,0 |
|
||
|
E.7800.1.0030.05
|
0.3 | 0.15 | 0.28 | 40 | 0.3 | 5 | 4,0 |
|
||
|
E.7800.1.0050.02
|
0.5 | 0.25 | 0.48 | 50 | 0.5 | 2 | 6,0 |
|
||
|
E.7800.1.0050.06
|
0.5 | 0.25 | 0.48 | 50 | 0.5 | 6 | 6,0 |
|
||
|
E.7800.1.0060.02
|
0.6 | 0.3 | 0.58 | 50 | 0.6 | 2 | 6,0 |
|
||
|
E.7800.1.0100.03
|
1 | 0.5 | 0.95 | 50 | 1 | 3 | 6,0 |
|
||
|
E.7800.1.0100.05
|
1 | 0.5 | 0.95 | 50 | 1 | 5 | 6,0 |
|
||
|
E.7800.1.0100.10
|
1 | 0.5 | 0.95 | 50 | 1 | 10 | 6,0 |
|
||
|
E.7800.1.0150.06
|
1.5 | 0.75 | 1.44 | 50 | 1.5 | 6 | 6,0 |
|
||
|
E.7800.1.0150.10
|
1.5 | 0.75 | 1.44 | 50 | 1.5 | 10 | 6,0 |
|
||
|
E.7800.1.0200.06
|
2 | 1 | 1.92 | 50 | 2 | 6 | 6,0 |
|
||
|
E.7800.1.0200.08
|
2 | 1 | 1.92 | 50 | 2 | 8 | 6,0 |
|
||
|
E.7800.1.0200.12
|
2 | 1 | 1.92 | 50 | 2 | 12 | 6,0 |
|
||
|
E.7800.1.0200.20
|
2 | 1 | 1.92 | 60 | 2 | 20 | 6,0 |
|
||
|
E.7800.1.0300.10
|
3 | 1.5 | 2.9 | 50 | 3 | 10 | 6,0 |
|
||
|
E.7800.1.0300.20
|
3 | 1.5 | 2.9 | 60 | 3 | 20 | 6,0 |
|
||
|
E.7800.1.0400.10
|
4 | 2 | 3.9 | 50 | 4 | 10 | 6,0 |
|
||
|
E.7800.1.0400.20
|
4 | 2 | 3.9 | 60 | 4 | 20 | 6,0 |
|
||
|
E.7800.1.0400.25
|
4 | 2 | 3.9 | 65 | 4 | 25 | 6,0 |
|
||
|
E.7800.1.0400.30
|
4 | 2 | 3.9 | 70 | 4 | 30 | 6,0 |
|
||
|
E.7800.1.0500.20
|
5 | 2.5 | 4.9 | 60 | 6 | 20 | 6,0 |
|
||
|
E.7800.1.0600.15
|
6 | 3 | 5.9 | 55 | 10 | 15 | 6,0 |
|
