Solid carbide 1-flute end mills for Aluminium, short
E.6602.0
Suitable for material
(Click for material suitability)P
General construction steel / free machining steel
| Material | <500 N/mm² | <700 N/mm² | <850 N/mm² | <1000 N/mm² | <1400 N/mm² |
|---|---|---|---|---|---|
| Suitability |
P
Heat treatable steel
| Material | <850 N/mm² | <1000 N/mm² | <1400 N/mm² | >1400 N/mm² |
|---|---|---|---|---|
| Suitability |
M
Rust and acid constant steels
| Material | <700 N/mm² | >700 N/mm² |
|---|---|---|
| Suitability |
K
Cast iron and cast iron alloy
| Material | Cast iron until 180 HB | Metallable cast iron | Cast iron with nodular graphite |
|---|---|---|---|
| Suitability |
N
Non-ferrous metal, plastics, graphite
| Material | Aluminium und AL-alloyed until 6% Si | Aluminium und AL-alloyed (under 12% Si) | Aluminium alloyed over 12% Si | Copper, brass, bronze, red brass | Plastics - thermoplast | Plastics - duroplast | GFK/CFK | Graphite |
|---|---|---|---|---|---|---|---|---|
| Suitability |
|
|
|
|
|
|
|
S
Special alloy and titanium
| Material | Inconel, Hastelloy, Nimonic, Monel | Titanium |
|---|---|---|
| Suitability |
H
Hardened steel
| Material | 45-55 HRC | 55-60 HRC | 60-65 HRC |
|---|---|---|---|
| Suitability |
| Product-Nr. |
|
|
|
|
in stock | Request | Alternatives |
|---|---|---|---|---|---|---|---|
|
E.6602.0.0100
|
1 | 35 | 4.5 | 3,0 |
|
||
|
E.6602.0.0150
|
1.5 | 50 | 6 | 3,0 |
|
||
|
E.6602.0.0200.10
|
2 | 40 | 10 | 2,0 |
|
||
|
E.6602.0.0250
|
2.5 | 40 | 6.5 | 3,0 |
|
||
|
E.6602.0.0300.10
|
3 | 40 | 10 | 3,0 |
|
||
|
E.6602.0.0400.10
|
4 | 40 | 10 | 4,0 |
|
||
|
E.6602.0.0400.14
|
4 | 54 | 14 | 4,0 |
|
||
|
E.6602.0.0500.16
|
5 | 60 | 16 | 5,0 |
|
||
|
E.6602.0.0600.14
|
6 | 50 | 14 | 6,0 |
|
||
|
E.6602.0.0600.20
|
6 | 60 | 20 | 6,0 |
|
||
|
E.6602.0.0800.25
|
8 | 75 | 25 | 8,0 |
|
||
|
E.6602.0.1000.25
|
10 | 75 | 25 | 10,0 |
|
||
|
E.6602.0.1200.25
|
12 | 75 | 25 | 12,0 |
|
