Solid carbide HPC HSC end mills with corner protection radius
E.7736.1
Suitable for material
(Click for material suitability)P
General construction steel / free machining steel
| Material | <500 N/mm² | <700 N/mm² | <850 N/mm² | <1000 N/mm² | <1400 N/mm² |
|---|---|---|---|---|---|
| Suitability |
|
|
P
Heat treatable steel
| Material | <850 N/mm² | <1000 N/mm² | <1400 N/mm² | >1400 N/mm² |
|---|---|---|---|---|
| Suitability |
|
|
M
Rust and acid constant steels
| Material | <700 N/mm² | >700 N/mm² |
|---|---|---|
| Suitability |
|
|
K
Cast iron and cast iron alloy
| Material | Cast iron until 180 HB | Metallable cast iron | Cast iron with nodular graphite |
|---|---|---|---|
| Suitability |
N
Non-ferrous metal, plastics, graphite
| Material | Aluminium und AL-alloyed until 6% Si | Aluminium und AL-alloyed (under 12% Si) | Aluminium alloyed over 12% Si | Copper, brass, bronze, red brass | Plastics - thermoplast | Plastics - duroplast | GFK/CFK | Graphite |
|---|---|---|---|---|---|---|---|---|
| Suitability |
S
Special alloy and titanium
| Material | Inconel, Hastelloy, Nimonic, Monel | Titanium |
|---|---|---|
| Suitability |
|
|
H
Hardened steel
| Material | 45-55 HRC | 55-60 HRC | 60-65 HRC |
|---|---|---|---|
| Suitability |
| Product-Nr. |
|
|
|
|
|
|
|
in stock | Request | Alternatives |
|---|---|---|---|---|---|---|---|---|---|---|
|
E.7736.1.0400
|
4 | 0.18 | 57 | 11 | - | 6,0 | 4 |
|
||
|
E.7736.1.0500
|
5 | 0.2 | 57 | 13 | - | 6,0 | 4 |
|
||
|
E.7736.1.0600
|
6 | 0.2 | 57 | 13 | - | 6,0 | 5 |
|
||
|
E.7736.1.0800
|
8 | 0.25 | 63 | 19 | - | 8,0 | 5 |
|
||
|
E.7736.1.1000
|
10 | 0.3 | 72 | 22 | - | 10,0 | 5 |
|
||
|
E.7736.1.1200
|
12 | 0.3 | 83 | 26 | - | 12,0 | 5 |
|
||
|
E.7736.1.1600
|
16 | 0.4 | 92 | 32 | - | 16,0 | 5 |
|
||
|
E.7736.1.2000
|
20 | 0.5 | 104 | 38 | - | 20,0 | 5 |
|
Customers have also seen
