Solid Carbide-ball nose end mill 30°, diamond-coated
E.7825.1
Suitable for material
(Click for material suitability)P
General construction steel / free machining steel
| Material | <500 N/mm² | <700 N/mm² | <850 N/mm² | <1000 N/mm² | <1400 N/mm² |
|---|---|---|---|---|---|
| Suitability |
P
Heat treatable steel
| Material | <850 N/mm² | <1000 N/mm² | <1400 N/mm² | >1400 N/mm² |
|---|---|---|---|---|
| Suitability |
M
Rust and acid constant steels
| Material | <700 N/mm² | >700 N/mm² |
|---|---|---|
| Suitability |
K
Cast iron and cast iron alloy
| Material | Cast iron until 180 HB | Metallable cast iron | Cast iron with nodular graphite |
|---|---|---|---|
| Suitability |
N
Non-ferrous metal, plastics, graphite
| Material | Aluminium und AL-alloyed until 6% Si | Aluminium und AL-alloyed (under 12% Si) | Aluminium alloyed over 12% Si | Copper, brass, bronze, red brass | Plastics - thermoplast | Plastics - duroplast | GFK/CFK | Graphite |
|---|---|---|---|---|---|---|---|---|
| Suitability |
|
|
S
Special alloy and titanium
| Material | Inconel, Hastelloy, Nimonic, Monel | Titanium |
|---|---|---|
| Suitability |
H
Hardened steel
| Material | 45-55 HRC | 55-60 HRC | 60-65 HRC |
|---|---|---|---|
| Suitability |
| Product-Nr. |
|
|
|
|
|
|
|
in stock | Request | Alternatives |
|---|---|---|---|---|---|---|---|---|---|---|
| E.7825.1.0030.01 | 0.15 | 0.3 | 0.3 | 55 | 0.3 | 1 | 3,0 |
|
||
| E.7825.1.0030.03 | 0.15 | 0.3 | 0.3 | 55 | 0.3 | 3 | 3,0 |
|
||
| E.7825.1.0030.05 | 0.15 | 0.3 | 0.3 | 55 | 0.3 | 5 | 3,0 |
|
||
| E.7825.1.0050.05 | 0.25 | 0.5 | 0.5 | 55 | 0.5 | 5 | 3,0 |
|
||
| E.7825.1.0080.08 | 0.25 | 0.8 | 0.8 | 55 | 1 | 8 | 3,0 |
|
||
| E.7825.1.0080.12 | 0.25 | 0.8 | 0.8 | 55 | 1 | 12 | 3,0 |
|
||
| E.7825.1.0080.16 | 0.25 | 0.8 | 0.8 | 55 | 1 | 16 | 3,0 |
|
||
| E.7825.1.0100.05 | 0.5 | 0.9 | 1 | 55 | 1 | 5 | 3,0 |
|
||
| E.7825.1.0100.10 | 0.5 | 0.9 | 1 | 55 | 1 | 10 | 3,0 |
|
||
| E.7825.1.0100.15 | 0.5 | 0.9 | 1 | 55 | 1 | 15 | 3,0 |
|
||
| E.7825.1.0100.20 | 0.5 | 0.9 | 1 | 55 | 1 | 20 | 3,0 |
|
||
| E.7825.1.0100.30 | 0.5 | 0.9 | 1 | 55 | 1 | 30 | 3,0 |
|
||
| E.7825.1.0150.10 | 0.75 | 1.4 | 1.5 | 55 | 2 | 10 | 3,0 |
|
||
| E.7825.1.0150.15 | 0.75 | 1.4 | 1.5 | 55 | 2 | 15 | 3,0 |
|
||
| E.7825.1.0200.10 | 1 | 1.9 | 2 | 55 | 2 | 10 | 3,0 |
|
||
| E.7825.1.0200.15 | 1 | 1.9 | 2 | 55 | 2 | 15 | 3,0 |
|
||
| E.7825.1.0200.20 | 1 | 1.9 | 2 | 55 | 2 | 20 | 3,0 |
|
||
| E.7825.1.0300.10 | 1.5 | 2.9 | 3 | 65 | 3 | 10 | 4,0 |
|
||
| E.7825.1.0300.15 | 1.5 | 2.9 | 3 | 65 | 3 | 15 | 4,0 |
|
||
| E.7825.1.0300.20 | 1.5 | 2.9 | 3 | 65 | 3 | 20 | 4,0 |
|
||
| E.7825.1.0400.20 | 2 | 3.9 | 4 | 65 | 4 | 20 | 6,0 |
|
||
| E.7825.1.0400.30 | 2 | 3.9 | 4 | 75 | 4 | 30 | 6,0 |
|
||
| E.7825.1.0400.40 | 2 | 3.9 | 4 | 90 | 4 | 40 | 6,0 |
|
||
| E.7825.1.0600.30 | 3 | 5.9 | 6 | 75 | 6 | 30 | 6,0 |
|
||
| E.7825.1.0600.40 | 3 | 5.9 | 6 | 90 | 6 | 40 | 6,0 |
|
||
| E.7825.1.0600.50 | 3 | 5.9 | 6 | 90 | 6 | 50 | 6,0 |
|
||
| E.7825.1.0800.60 | 4 | 7.8 | 8 | 100 | 8 | 60 | 8,0 |
|
||
| E.7825.1.1000.30 | 5 | 9.8 | 10 | 80 | 10 | 30 | 10,0 |
|
