Suitable for material
(Click for material suitability)P
General construction steel / free machining steel
| Material | <500 N/mm² | <700 N/mm² | <850 N/mm² | <1000 N/mm² | <1400 N/mm² |
|---|---|---|---|---|---|
| Suitability |
P
Heat treatable steel
| Material | <850 N/mm² | <1000 N/mm² | <1400 N/mm² | >1400 N/mm² |
|---|---|---|---|---|
| Suitability |
M
Rust and acid constant steels
| Material | <700 N/mm² | >700 N/mm² |
|---|---|---|
| Suitability |
K
Cast iron and cast iron alloy
| Material | Cast iron until 180 HB | Metallable cast iron | Cast iron with nodular graphite |
|---|---|---|---|
| Suitability |
|
|
|
N
Non-ferrous metal, plastics, graphite
| Material | Aluminium und AL-alloyed until 6% Si | Aluminium und AL-alloyed (under 12% Si) | Aluminium alloyed over 12% Si | Copper, brass, bronze, red brass | Plastics - thermoplast | Plastics - duroplast | GFK/CFK | Graphite |
|---|---|---|---|---|---|---|---|---|
| Suitability |
|
|
|
|
|
|
S
Special alloy and titanium
| Material | Inconel, Hastelloy, Nimonic, Monel | Titanium |
|---|---|---|
| Suitability |
H
Hardened steel
| Material | 45-55 HRC | 55-60 HRC | 60-65 HRC |
|---|---|---|---|
| Suitability |
| Product-Nr. |
|
|
in stock | Request | Alternatives |
|---|---|---|---|---|---|
| E.3664.5.1000-1400 | 2,5 | 10,00 - 14 |
|
||
| E.3664.5.1350-2000 | 3,5 | 13,50 - 20 |
|
||
| E.3664.5.1895-2600 | 4,0 | 18,95 - 26 |
|
||
| E.3664.5.2400-2900 | 5,0 | 24,00 - 29 |
|
||
| E.3664.5.2910-3600 | 5,0 | 29,10 - 36 |
|
||
| E.3664.5.3500-4550 | 7,0 | 35,00 - 45 |
|
||
| E.3664.5.3610-4050 | 5,0 | 36,10 - 40 |
|
||
| E.3664.5.4600-5550 | 7,0 | 46,00 - 55 |
|
