Suitable for material
(Click for material suitability)P
General construction steel / free machining steel
| Material | <500 N/mm² | <700 N/mm² | <850 N/mm² | <1000 N/mm² | <1400 N/mm² |
|---|---|---|---|---|---|
| Suitability |
|
|
|
|
|
P
Heat treatable steel
| Material | <850 N/mm² | <1000 N/mm² | <1400 N/mm² | >1400 N/mm² |
|---|---|---|---|---|
| Suitability |
|
|
|
|
M
Rust and acid constant steels
| Material | <700 N/mm² | >700 N/mm² |
|---|---|---|
| Suitability |
|
|
K
Cast iron and cast iron alloy
| Material | Cast iron until 180 HB | Metallable cast iron | Cast iron with nodular graphite |
|---|---|---|---|
| Suitability |
N
Non-ferrous metal, plastics, graphite
| Material | Aluminium und AL-alloyed until 6% Si | Aluminium und AL-alloyed (under 12% Si) | Aluminium alloyed over 12% Si | Copper, brass, bronze, red brass | Plastics - thermoplast | Plastics - duroplast | GFK/CFK | Graphite |
|---|---|---|---|---|---|---|---|---|
| Suitability |
|
|
|
S
Special alloy and titanium
| Material | Inconel, Hastelloy, Nimonic, Monel | Titanium |
|---|---|---|
| Suitability |
H
Hardened steel
| Material | 45-55 HRC | 55-60 HRC | 60-65 HRC |
|---|---|---|---|
| Suitability |
| Product-Nr. |
|
|
|
|
in stock | Request | Alternatives |
|---|---|---|---|---|---|---|---|
| E.2617.0.0200.125 | 2 | 125 | 93 | 2,0 |
|
||
| E.2617.0.0200.160 | 2 | 160 | 120 | 2,0 |
|
||
| E.2617.0.0250.125 | 2.5 | 125 | 93 | 2,5 |
|
||
| E.2617.0.0250.160 | 2.5 | 160 | 120 | 2,5 |
|
||
| E.2617.0.0300.125 | 3 | 125 | 93 | 3,0 |
|
||
| E.2617.0.0300.160 | 3 | 160 | 120 | 3,0 |
|
||
| E.2617.0.0300.200 | 3 | 200 | 150 | 3,0 |
|
||
| E.2617.0.0300.250 | 3 | 250 | 187 | 3,0 |
|
||
| E.2617.0.0400.160 | 4 | 160 | 120 | 4,0 |
|
||
| E.2617.0.0400.200 | 4 | 200 | 150 | 4,0 |
|
||
| E.2617.0.0400.250 | 4 | 250 | 187 | 4,0 |
|
||
| E.2617.0.0400.315 | 4 | 315 | 235 | 4,0 |
|
||
| E.2617.0.0500.160 | 5 | 160 | 120 | 5,0 |
|
||
| E.2617.0.0500.200 | 5 | 200 | 150 | 5,0 |
|
||
| E.2617.0.0500.250 | 5 | 250 | 187 | 5,0 |
|
||
| E.2617.0.0500.315 | 5 | 315 | 235 | 5,0 |
|
||
| E.2617.0.0500.400 | 5 | 400 | 300 | 5,0 |
|
||
| E.2617.0.0500.500 | 5 | 500 | 450 | 5,0 |
|
||
| E.2617.0.0600.160 | 6 | 160 | 120 | 6,0 |
|
||
| E.2617.0.0600.200 | 6 | 200 | 150 | 6,0 |
|
||
| E.2617.0.0600.250 | 6 | 250 | 187 | 6,0 |
|
||
| E.2617.0.0600.315 | 6 | 315 | 235 | 6,0 |
|
||
| E.2617.0.0600.400 | 6 | 400 | 300 | 6,0 |
|
||
| E.2617.0.0600.500 | 6 | 500 | 450 | 6,0 |
|
||
| E.2617.0.0680.250 | 6.8 | 250 | 187 | 6,8 |
|
||
| E.2617.0.0700.200 | 7 | 200 | 150 | 7,0 |
|
||
| E.2617.0.0700.250 | 7 | 250 | 187 | 7,0 |
|
||
| E.2617.0.0700.315 | 7 | 315 | 235 | 7,0 |
|
||
| E.2617.0.0700.400 | 7 | 400 | 300 | 7,0 |
|
||
| E.2617.0.0700.500 | 7 | 500 | 450 | 7,0 |
|
||
| E.2617.0.0800.200 | 8 | 200 | 150 | 8,0 |
|
||
| E.2617.0.0800.250 | 8 | 250 | 187 | 8,0 |
|
||
| E.2617.0.0800.315 | 8 | 315 | 235 | 8,0 |
|
||
| E.2617.0.0800.400 | 8 | 400 | 300 | 8,0 |
|
||
| E.2617.0.0800.500 | 8 | 500 | 450 | 8,0 |
|
||
| E.2617.0.0900.200 | 9 | 200 | 150 | 9,0 |
|
||
| E.2617.0.0900.250 | 9 | 250 | 187 | 9,0 |
|
||
| E.2617.0.0900.315 | 9 | 315 | 235 | 9,0 |
|
||
| E.2617.0.0900.400 | 9 | 400 | 300 | 9,0 |
|
||
| E.2617.0.0900.500 | 9 | 500 | 450 | 9,0 |
|
||
| E.2617.0.1000.200 | 10 | 200 | 150 | 10,0 |
|
||
| E.2617.0.1000.250 | 10 | 250 | 187 | 10,0 |
|
||
| E.2617.0.1000.315 | 10 | 315 | 235 | 10,0 |
|
||
| E.2617.0.1000.400 | 10 | 400 | 300 | 10,0 |
|
||
| E.2617.0.1000.500 | 10 | 500 | 450 | 10,0 |
|
||
| E.2617.0.1050.250 | 10.5 | 250 | 187 | 10,5 |
|
||
| E.2617.0.1100.250 | 11 | 250 | 187 | 11,0 |
|
||
| E.2617.0.1100.315 | 11 | 315 | 235 | 11,0 |
|
||
| E.2617.0.1100.400 | 11 | 400 | 300 | 11,0 |
|
||
| E.2617.0.1100.500 | 11 | 500 | 450 | 11,0 |
|
||
| E.2617.0.1200.250 | 12 | 250 | 187 | 12,0 |
|
||
| E.2617.0.1200.315 | 12 | 315 | 235 | 12,0 |
|
||
| E.2617.0.1200.400 | 12 | 400 | 300 | 12,0 |
|
||
| E.2617.0.1200.500 | 12 | 500 | 450 | 12,0 |
|
Customers have also seen
