HSSE machine taps for long-chipping Alu + Cu
E.1650.1
Suitable for material
(Click for material suitability)P
General construction steel / free machining steel
| Material | <500 N/mm² | <700 N/mm² | <850 N/mm² | <1000 N/mm² | <1400 N/mm² |
|---|---|---|---|---|---|
| Suitability |
P
Heat treatable steel
| Material | <850 N/mm² | <1000 N/mm² | <1400 N/mm² | >1400 N/mm² |
|---|---|---|---|---|
| Suitability |
M
Rust and acid constant steels
| Material | <700 N/mm² | >700 N/mm² |
|---|---|---|
| Suitability |
K
Cast iron and cast iron alloy
| Material | Cast iron until 180 HB | Metallable cast iron | Cast iron with nodular graphite |
|---|---|---|---|
| Suitability |
N
Non-ferrous metal, plastics, graphite
| Material | Aluminium und AL-alloyed until 6% Si | Aluminium und AL-alloyed (under 12% Si) | Aluminium alloyed over 12% Si | Copper, brass, bronze, red brass | Plastics - thermoplast | Plastics - duroplast | GFK/CFK | Graphite |
|---|---|---|---|---|---|---|---|---|
| Suitability |
|
|
|
|
S
Special alloy and titanium
| Material | Inconel, Hastelloy, Nimonic, Monel | Titanium |
|---|---|---|
| Suitability |
|
|
H
Hardened steel
| Material | 45-55 HRC | 55-60 HRC | 60-65 HRC |
|---|---|---|---|
| Suitability |
| Product-Nr. |
|
|
|
|
|
|
|
in stock | Request | Alternatives |
|---|---|---|---|---|---|---|---|---|---|---|
| E.1650.1.M03 | M 3 | 56 | 10 | 18 | 3,5 | 2,7 | 0,50 |
|
||
| E.1650.1.M04 | M 4 | 63 | 12 | 21 | 4,5 | 3,4 | 0,70 |
|
||
| E.1650.1.M05 | M 5 | 70 | 14 | 24.5 | 6,0 | 4,9 | 0,80 |
|
||
| E.1650.1.M06 | M 6 | 80 | 16 | 29 | 6,0 | 4,9 | 1,00 |
|
||
| E.1650.1.M08 | M 8 | 90 | 18 | 33 | 8,0 | 6,2 | 1,25 |
|
||
| E.1650.1.M10 | M 10 | 100 | 20 | 36 | 10,0 | 8,0 | 1,50 |
|
||
| E.1650.1.M12 | M 12 | 110 | 24 | - | 9,0 | 7,0 | 1,75 |
|
