Suitable for material
(Click for material suitability)P
General construction steel / free machining steel
| Material | <500 N/mm² | <700 N/mm² | <850 N/mm² | <1000 N/mm² | <1400 N/mm² |
|---|---|---|---|---|---|
| Suitability |
|
|
|
|
P
Heat treatable steel
| Material | <850 N/mm² | <1000 N/mm² | <1400 N/mm² | >1400 N/mm² |
|---|---|---|---|---|
| Suitability |
M
Rust and acid constant steels
| Material | <700 N/mm² | >700 N/mm² |
|---|---|---|
| Suitability |
|
|
K
Cast iron and cast iron alloy
| Material | Cast iron until 180 HB | Metallable cast iron | Cast iron with nodular graphite |
|---|---|---|---|
| Suitability |
N
Non-ferrous metal, plastics, graphite
| Material | Aluminium und AL-alloyed until 6% Si | Aluminium und AL-alloyed (under 12% Si) | Aluminium alloyed over 12% Si | Copper, brass, bronze, red brass | Plastics - thermoplast | Plastics - duroplast | GFK/CFK | Graphite |
|---|---|---|---|---|---|---|---|---|
| Suitability |
|
S
Special alloy and titanium
| Material | Inconel, Hastelloy, Nimonic, Monel | Titanium |
|---|---|---|
| Suitability |
|
H
Hardened steel
| Material | 45-55 HRC | 55-60 HRC | 60-65 HRC |
|---|---|---|---|
| Suitability |
| Product-Nr. |
|
|
|
|
|
|
|
in stock | Request | Alternatives |
|---|---|---|---|---|---|---|---|---|---|---|
| E.1640.0.M03 | M 3 | 56 | 10 | 18 | 3,5 | 2,7 | 0,50 |
|
||
| E.1640.0.M04 | M 4 | 63 | 12 | 21 | 4,5 | 3,4 | 0,70 |
|
||
| E.1640.0.M05 | M 5 | 70 | 14 | 25 | 6,0 | 4,9 | 0,80 |
|
||
| E.1640.0.M06 | M 6 | 80 | 18 | 30 | 6,0 | 4,9 | 1,00 |
|
||
| E.1640.0.M08 | M 8 | 90 | 20 | 35 | 8,0 | 6,2 | 1,25 |
|
||
| E.1640.0.M10 | M 10 | 100 | 20 | 39 | 10,0 | 8,0 | 1,50 |
|
||
| E.1640.0.M12 | M 12 | 110 | 24 | - | 9,0 | 7,0 | 1,75 |
|
||
| E.1640.0.M16 | M 16 | 110 | 32 | - | 12,0 | 9,0 | 2,00 |
|
||
| E.1640.0.M18 | M 18 | 125 | 32 | - | 14,0 | 11,0 | 2,50 |
|
||
| E.1640.0.M20 | M 20 | 140 | 32 | - | 16,0 | 12,0 | 2,50 |
|
||
| E.1640.0.M24 | M 24 | 160 | 38 | - | 18,0 | 14,5 | 3,00 |
|
Customers have also seen
