-
Solid carbide end mills „Trochoid“ with chip breakers, extra long
E.7613.1XL -
- Cutting Data
Suitable for material
(Click for material suitability)P
General construction steel / free machining steel
| Material | <500 N/mm² | <700 N/mm² | <850 N/mm² | <1000 N/mm² | <1400 N/mm² |
|---|---|---|---|---|---|
| Suitability |
|
|
|
|
|
P
Heat treatable steel
| Material | <850 N/mm² | <1000 N/mm² | <1400 N/mm² | >1400 N/mm² |
|---|---|---|---|---|
| Suitability |
|
|
|
|
M
Rust and acid constant steels
| Material | <700 N/mm² | >700 N/mm² |
|---|---|---|
| Suitability |
|
|
K
Cast iron and cast iron alloy
| Material | Cast iron until 180 HB | Metallable cast iron | Cast iron with nodular graphite |
|---|---|---|---|
| Suitability |
|
|
|
N
Non-ferrous metal, plastics, graphite
| Material | Aluminium und AL-alloyed until 6% Si | Aluminium und AL-alloyed (under 12% Si) | Aluminium alloyed over 12% Si | Copper, brass, bronze, red brass | Plastics - thermoplast | Plastics - duroplast | GFK/CFK | Graphite |
|---|---|---|---|---|---|---|---|---|
| Suitability |
|
|
S
Special alloy and titanium
| Material | Inconel, Hastelloy, Nimonic, Monel | Titanium |
|---|---|---|
| Suitability |
|
|
H
Hardened steel
| Material | 45-55 HRC | 55-60 HRC | 60-65 HRC |
|---|---|---|---|
| Suitability |
available variants
E.7613.1XL.0500
5
80
24
6,0
4.6
31
0,2
E.7613.1XL.0600
6
80
24
6,0
5.5
31
0,2
E.7613.1XL.0800
8
80
32
8,0
7.5
40
0,2
E.7613.1XL.1000
10
100
40
10,0
9.5
50
0,25
E.7613.1XL.1200
12
110
48
12,0
11.5
60
0,3
E.7613.1XL.1600
16
130
64
16,0
15.5
76
0,4
E.7613.1XL.2000
20
150
80
20,0
19.5
92
0,5
1
1 from 1
Viewed