Suitable for material
(Click for material suitability)P
General construction steel / free machining steel
| Material | <500 N/mm² | <700 N/mm² | <850 N/mm² | <1000 N/mm² | <1400 N/mm² |
|---|---|---|---|---|---|
| Suitability |
|
|
|
|
|
P
Heat treatable steel
| Material | <850 N/mm² | <1000 N/mm² | <1400 N/mm² | >1400 N/mm² |
|---|---|---|---|---|
| Suitability |
|
|
|
M
Rust and acid constant steels
| Material | <700 N/mm² | >700 N/mm² |
|---|---|---|
| Suitability |
|
|
K
Cast iron and cast iron alloy
| Material | Cast iron until 180 HB | Metallable cast iron | Cast iron with nodular graphite |
|---|---|---|---|
| Suitability |
|
|
|
N
Non-ferrous metal, plastics, graphite
| Material | Aluminium und AL-alloyed until 6% Si | Aluminium und AL-alloyed (under 12% Si) | Aluminium alloyed over 12% Si | Copper, brass, bronze, red brass | Plastics - thermoplast | Plastics - duroplast | GFK/CFK | Graphite |
|---|---|---|---|---|---|---|---|---|
| Suitability |
|
|
|
|
|
|
|
S
Special alloy and titanium
| Material | Inconel, Hastelloy, Nimonic, Monel | Titanium |
|---|---|---|
| Suitability |
H
Hardened steel
| Material | 45-55 HRC | 55-60 HRC | 60-65 HRC |
|---|---|---|---|
| Suitability |
| Product-Nr. |
|
|
|
|
|
|
in stock | Request | Alternatives |
|---|---|---|---|---|---|---|---|---|---|
|
E.3609.0.0100
|
1 | - | M 1,1 | 75 | 25 | 1,00 |
|
||
|
E.3609.0.0110
|
1.1 | M 1,4 | M 1,2 | 75 | 25 | 1,10 |
|
||
|
E.3609.0.0120
|
1.2 | - | - | 75 | 25 | 1,20 |
|
||
|
E.3609.0.0130
|
1.3 | - | - | 75 | 25 | 1,30 |
|
||
|
E.3609.0.0140
|
1.4 | - | - | 75 | 30 | 1,40 |
|
||
|
E.3609.0.0150
|
1.5 | - | - | 75 | 30 | 1,50 |
|
||
|
E.3609.0.0160
|
1.6 | M 2 | - | 75 | 30 | 1,60 |
|
||
|
E.3609.0.0170
|
1.7 | - | - | 75 | 30 | 1,70 |
|
||
|
E.3609.0.0180
|
1.8 | M 2,2 | M 2 | 75 | 30 | 1,80 |
|
||
|
E.3609.0.0190
|
1.9 | M 2,3 | - | 75 | 30 | 1,90 |
|
||
|
E.3609.0.0200
|
2 | - | - | 75 | 30 | 2,00 |
|
||
|
E.3609.0.0210
|
2.1 | - | - | 75 | 30 | 2,10 |
|
||
|
E.3609.0.0220
|
2.2 | - | - | 75 | 30 | 2,20 |
|
||
|
E.3609.0.0230
|
2.3 | - | - | 75 | 30 | 2,30 |
|
||
|
E.3609.0.0240
|
2.4 | - | - | 100 | 35 | 2,40 |
|
||
|
E.3609.0.0250
|
2.5 | M 3 | - | 100 | 35 | 2,50 |
|
||
|
E.3609.0.0260
|
2.6 | - | - | 100 | 35 | 2,60 |
|
||
|
E.3609.0.0270
|
2.7 | - | - | 100 | 35 | 2,70 |
|
||
|
E.3609.0.0280
|
2.8 | - | M 3 | 100 | 35 | 2,80 |
|
||
|
E.3609.0.0290
|
2.9 | M 3,5 | M 3 x 0,25 | 100 | 35 | 2,90 |
|
||
|
E.3609.0.0300
|
3 | - | - | 100 | 50 | 3,00 |
|
||
|
E.3609.0.0320
|
3.2 | - | - | 100 | 50 | 3,2 |
|
||
|
E.3609.0.0330
|
3.3 | M 4 | M 3,5 x 0,5 | 100 | 50 | 3,30 |
|
||
|
E.3609.0.0350
|
3.5 | M 4 x 0,5 | - | 100 | 50 | 3,50 |
|
||
|
E.3609.0.0380
|
3.8 | - | M 4 x 0,5 | 100 | 50 | 3,80 |
|
||
|
E.3609.0.0400
|
4 | M 4,5 x 0,5 | - | 100 | 50 | 4,00 |
|
||
|
E.3609.0.0420
|
4.2 | M 5 | M 4,5 | 100 | 50 | 4,20 |
|
||
|
E.3609.0.0500
|
5 | M 6/M 5,5 x 0,5 | - | 150 | 75 | 5,00 |
|
||
|
E.3609.0.0600
|
6 | M 7 | - | 150 | 75 | 6,00 |
|
||
|
E.3609.0.0680
|
6.8 | M 8 | M 7 x 0,5 | 150 | 75 | 6,80 |
|
||
|
E.3609.0.0800
|
8 | M 9 x 1 | - | 150 | 75 | 8,00 |
|
||
|
E.3609.0.0850
|
8.5 | M 10 | - | 150 | 75 | 8,50 |
|
||
|
E.3609.0.1000
|
10 | M 11 x 1 | - | 150 | 75 | 10,00 |
|
