Suitable for material
(Click for material suitability)P
General construction steel / free machining steel
| Material | <500 N/mm² | <700 N/mm² | <850 N/mm² | <1000 N/mm² | <1400 N/mm² |
|---|---|---|---|---|---|
| Suitability |
|
|
|
|
|
P
Heat treatable steel
| Material | <850 N/mm² | <1000 N/mm² | <1400 N/mm² | >1400 N/mm² |
|---|---|---|---|---|
| Suitability |
|
|
|
M
Rust and acid constant steels
| Material | <700 N/mm² | >700 N/mm² |
|---|---|---|
| Suitability |
|
|
K
Cast iron and cast iron alloy
| Material | Cast iron until 180 HB | Metallable cast iron | Cast iron with nodular graphite |
|---|---|---|---|
| Suitability |
|
|
|
N
Non-ferrous metal, plastics, graphite
| Material | Aluminium und AL-alloyed until 6% Si | Aluminium und AL-alloyed (under 12% Si) | Aluminium alloyed over 12% Si | Copper, brass, bronze, red brass | Plastics - thermoplast | Plastics - duroplast | GFK/CFK | Graphite |
|---|---|---|---|---|---|---|---|---|
| Suitability |
|
|
|
|
|
|
|
S
Special alloy and titanium
| Material | Inconel, Hastelloy, Nimonic, Monel | Titanium |
|---|---|---|
| Suitability |
H
Hardened steel
| Material | 45-55 HRC | 55-60 HRC | 60-65 HRC |
|---|---|---|---|
| Suitability |
| Product-Nr. |
|
|
|
|
|
|
in stock | Request | Alternatives |
|---|---|---|---|---|---|---|---|---|---|
| E.3609.0.0100 | M 1,1 | - | 1 | 75 | 25 | 1,00 |
|
||
| E.3609.0.0110 | M 1,2 | M 1,4 | 1.1 | 75 | 25 | 1,10 |
|
||
| E.3609.0.0120 | - | - | 1.2 | 75 | 25 | 1,20 |
|
||
| E.3609.0.0130 | - | - | 1.3 | 75 | 25 | 1,30 |
|
||
| E.3609.0.0140 | - | - | 1.4 | 75 | 30 | 1,40 |
|
||
| E.3609.0.0150 | - | - | 1.5 | 75 | 30 | 1,50 |
|
||
| E.3609.0.0160 | - | M 2 | 1.6 | 75 | 30 | 1,60 |
|
||
| E.3609.0.0170 | - | - | 1.7 | 75 | 30 | 1,70 |
|
||
| E.3609.0.0180 | M 2 | M 2,2 | 1.8 | 75 | 30 | 1,80 |
|
||
| E.3609.0.0190 | - | M 2,3 | 1.9 | 75 | 30 | 1,90 |
|
||
| E.3609.0.0200 | - | - | 2 | 75 | 30 | 2,00 |
|
||
| E.3609.0.0210 | - | - | 2.1 | 75 | 30 | 2,10 |
|
||
| E.3609.0.0220 | - | - | 2.2 | 75 | 30 | 2,20 |
|
||
| E.3609.0.0230 | - | - | 2.3 | 75 | 30 | 2,30 |
|
||
| E.3609.0.0240 | - | - | 2.4 | 100 | 35 | 2,40 |
|
||
| E.3609.0.0250 | - | M 3 | 2.5 | 100 | 35 | 2,50 |
|
||
| E.3609.0.0260 | - | - | 2.6 | 100 | 35 | 2,60 |
|
||
| E.3609.0.0270 | - | - | 2.7 | 100 | 35 | 2,70 |
|
||
| E.3609.0.0280 | M 3 | - | 2.8 | 100 | 35 | 2,80 |
|
||
| E.3609.0.0290 | M 3 x 0,25 | M 3,5 | 2.9 | 100 | 35 | 2,90 |
|
||
| E.3609.0.0300 | - | - | 3 | 100 | 50 | 3,00 |
|
||
| E.3609.0.0320 | - | - | 3.2 | 100 | 50 | 3,2 |
|
||
| E.3609.0.0330 | M 3,5 x 0, | M 4 | 3.3 | 100 | 50 | 3,30 |
|
||
| E.3609.0.0350 | - | M 4 x 0,5 | 3.5 | 100 | 50 | 3,50 |
|
||
| E.3609.0.0380 | M 4 x 0,5 | - | 3.8 | 100 | 50 | 3,80 |
|
||
| E.3609.0.0400 | - | M 4,5 x 0, | 4 | 100 | 50 | 4,00 |
|
||
| E.3609.0.0420 | M 4,5 | M 5 | 4.2 | 100 | 50 | 4,20 |
|
||
| E.3609.0.0500 | - | M 6/M 5,5 | 5 | 150 | 75 | 5,00 |
|
||
| E.3609.0.0600 | - | M 7 | 6 | 150 | 75 | 6,00 |
|
||
| E.3609.0.0680 | M 7 x 0,5 | M 8 | 6.8 | 150 | 75 | 6,80 |
|
||
| E.3609.0.0800 | - | M 9 x 1 | 8 | 150 | 75 | 8,00 |
|
||
| E.3609.0.0850 | - | M 10 | 8.5 | 150 | 75 | 8,50 |
|
||
| E.3609.0.1000 | - | M 11 x 1 | 10 | 150 | 75 | 10,00 |
|
