Solid carbide profile cutters 30° for moulds, long
E.7655.1
Suitable for material
(Click for material suitability)P
General construction steel / free machining steel
| Material | <500 N/mm² | <700 N/mm² | <850 N/mm² | <1000 N/mm² | <1400 N/mm² |
|---|---|---|---|---|---|
| Suitability |
|
|
|
|
P
Heat treatable steel
| Material | <850 N/mm² | <1000 N/mm² | <1400 N/mm² | >1400 N/mm² |
|---|---|---|---|---|
| Suitability |
|
|
|
M
Rust and acid constant steels
| Material | <700 N/mm² | >700 N/mm² |
|---|---|---|
| Suitability |
K
Cast iron and cast iron alloy
| Material | Cast iron until 180 HB | Metallable cast iron | Cast iron with nodular graphite |
|---|---|---|---|
| Suitability |
|
|
|
N
Non-ferrous metal, plastics, graphite
| Material | Aluminium und AL-alloyed until 6% Si | Aluminium und AL-alloyed (under 12% Si) | Aluminium alloyed over 12% Si | Copper, brass, bronze, red brass | Plastics - thermoplast | Plastics - duroplast | GFK/CFK | Graphite |
|---|---|---|---|---|---|---|---|---|
| Suitability |
S
Special alloy and titanium
| Material | Inconel, Hastelloy, Nimonic, Monel | Titanium |
|---|---|---|
| Suitability |
H
Hardened steel
| Material | 45-55 HRC | 55-60 HRC | 60-65 HRC |
|---|---|---|---|
| Suitability |
|
|
|
| Product-Nr. |
|
|
|
|
|
|
|
in stock | Request | Alternatives |
|---|---|---|---|---|---|---|---|---|---|---|
| E.7655.1.0600.01 | 5.5 | 0.1 | 6 | 80 | 7 | 44 | 6,0 |
|
||
| E.7655.1.0600.02 | 5.5 | 0.2 | 6 | 80 | 7 | 44 | 6,0 |
|
||
| E.7655.1.0600.03 | 5.5 | 0.3 | 6 | 80 | 7 | 44 | 6,0 |
|
||
| E.7655.1.0600.04 | 5.5 | 0.4 | 6 | 80 | 7 | 44 | 6,0 |
|
||
| E.7655.1.0600.05 | 5.5 | 0.5 | 6 | 80 | 7 | 44 | 6,0 |
|
||
| E.7655.1.0600.10 | 5.5 | 1 | 6 | 80 | 7 | 44 | 6,0 |
|
||
| E.7655.1.0600.14 | 5.5 | 1.4 | 6 | 80 | 7 | 44 | 6,0 |
|
||
| E.7655.1.0600.15 | 5.5 | 1.5 | 6 | 80 | 7 | 44 | 6,0 |
|
||
| E.7655.1.0600.16 | 5.5 | 1.6 | 6 | 80 | 7 | 44 | 6,0 |
|
||
| E.7655.1.0600.17 | 5.5 | 1.7 | 6 | 80 | 7 | 44 | 6,0 |
|
||
| E.7655.1.0600.18 | 5.5 | 1.8 | 6 | 80 | 7 | 44 | 6,0 |
|
||
| E.7655.1.0600.19 | 5.5 | 1.9 | 6 | 80 | 7 | 44 | 6,0 |
|
||
| E.7655.1.0600.21 | 5.5 | 2.1 | 6 | 80 | 7 | 44 | 6,0 |
|
||
| E.7655.1.0600.22 | 5.5 | 2.2 | 6 | 80 | 7 | 44 | 6,0 |
|
||
| E.7655.1.0600.23 | 5.5 | 2.3 | 6 | 80 | 7 | 44 | 6,0 |
|
||
| E.7655.1.0600.24 | 5.5 | 2.4 | 6 | 80 | 7 | 44 | 6,0 |
|
||
| E.7655.1.0800.05 | 7.4 | 0.5 | 8 | 100 | 9 | 54 | 8,0 |
|
||
| E.7655.1.0800.10 | 7.4 | 1 | 8 | 100 | 9 | 54 | 8,0 |
|
||
| E.7655.1.0800.15 | 7.4 | 1.5 | 8 | 100 | 9 | 54 | 8,0 |
|
||
| E.7655.1.0800.20 | 7.4 | 2 | 8 | 100 | 9 | 54 | 8,0 |
|
||
| E.7655.1.1000.10 | 9.2 | 1 | 10 | 100 | 11 | 60 | 10,0 |
|
||
| E.7655.1.1000.15 | 9.2 | 1.5 | 10 | 100 | 11 | 60 | 10,0 |
|
||
| E.7655.1.1000.20 | 9.2 | 2 | 10 | 100 | 11 | 60 | 10,0 |
|
||
| E.7655.1.1200.05 | 11 | 0.5 | 12 | 120 | 12 | 75 | 12,0 |
|
||
| E.7655.1.1200.10 | 11 | 1 | 12 | 120 | 12 | 75 | 12,0 |
|
||
| E.7655.1.1200.15 | 11 | 1.5 | 12 | 120 | 12 | 75 | 12,0 |
|
||
| E.7655.1.1200.20 | 11 | 2 | 12 | 120 | 12 | 75 | 12,0 |
|
||
| E.7655.1.1600.20 | 15 | 2 | 16 | 150 | 16 | 92 | 16,0 |
|
