Solid carbide micro ball nose end mills 30° for Aluminium
E.7691.1
Suitable for material
(Click for material suitability)P
General construction steel / free machining steel
| Material | <500 N/mm² | <700 N/mm² | <850 N/mm² | <1000 N/mm² | <1400 N/mm² |
|---|---|---|---|---|---|
| Suitability |
P
Heat treatable steel
| Material | <850 N/mm² | <1000 N/mm² | <1400 N/mm² | >1400 N/mm² |
|---|---|---|---|---|
| Suitability |
M
Rust and acid constant steels
| Material | <700 N/mm² | >700 N/mm² |
|---|---|---|
| Suitability |
K
Cast iron and cast iron alloy
| Material | Cast iron until 180 HB | Metallable cast iron | Cast iron with nodular graphite |
|---|---|---|---|
| Suitability |
N
Non-ferrous metal, plastics, graphite
| Material | Aluminium und AL-alloyed until 6% Si | Aluminium und AL-alloyed (under 12% Si) | Aluminium alloyed over 12% Si | Copper, brass, bronze, red brass | Plastics - thermoplast | Plastics - duroplast | GFK/CFK | Graphite |
|---|---|---|---|---|---|---|---|---|
| Suitability |
|
|
|
|
S
Special alloy and titanium
| Material | Inconel, Hastelloy, Nimonic, Monel | Titanium |
|---|---|---|
| Suitability |
H
Hardened steel
| Material | 45-55 HRC | 55-60 HRC | 60-65 HRC |
|---|---|---|---|
| Suitability |
| Product-Nr. |
|
|
|
|
|
|
|
in stock | Request | Alternatives |
|---|---|---|---|---|---|---|---|---|---|---|
|
E.7691.1.0040.02
|
0.2 | 0.4 | 0.38 | 55 | 0.5 | 2 | 3,0 |
|
||
|
E.7691.1.0040.04
|
0.2 | 0.4 | 0.38 | 55 | 0.5 | 4 | 3,0 |
|
||
|
E.7691.1.0050.03
|
0.25 | 0.5 | 0.48 | 55 | 0.6 | 3 | 3,0 |
|
||
|
E.7691.1.0050.05
|
0.25 | 0.5 | 0.48 | 55 | 0.6 | 5 | 3,0 |
|
||
|
E.7691.1.0060.04
|
0.3 | 0.6 | 0.58 | 55 | 0.8 | 4 | 4,0 |
|
||
|
E.7691.1.0060.06
|
0.3 | 0.6 | 0.58 | 55 | 0.8 | 6 | 4,0 |
|
||
|
E.7691.1.0080.06
|
0.4 | 0.8 | 0.77 | 55 | 1 | 6 | 4,0 |
|
||
|
E.7691.1.0080.10
|
0.4 | 0.8 | 0.77 | 55 | 1 | 10 | 4,0 |
|
||
|
E.7691.1.0100.05
|
0.5 | 1 | 0.95 | 55 | 1.2 | 5 | 4,0 |
|
||
|
E.7691.1.0100.10
|
0.5 | 1 | 0.95 | 55 | 1.2 | 10 | 4,0 |
|
||
|
E.7691.1.0100.15
|
0.5 | 1 | 0.95 | 55 | 1.2 | 15 | 4,0 |
|
||
|
E.7691.1.0100.20
|
0.5 | 1 | 0.95 | 55 | 1.2 | 20 | 4,0 |
|
||
|
E.7691.1.0100.25
|
0.5 | 1 | 0.95 | 60 | 1.2 | 25 | 4,0 |
|
||
|
E.7691.1.0120.06
|
0.6 | 1.2 | 1.15 | 55 | 1.4 | 6 | 4,0 |
|
||
|
E.7691.1.0120.12
|
0.6 | 1.2 | 1.15 | 55 | 1.4 | 12 | 4,0 |
|
||
|
E.7691.1.0120.18
|
0.6 | 1.2 | 1.15 | 55 | 1.4 | 18 | 4,0 |
|
||
|
E.7691.1.0120.25
|
0.6 | 1.2 | 1.15 | 60 | 1.4 | 25 | 4,0 |
|
||
|
E.7691.1.0150.08
|
0.75 | 1.5 | 1.44 | 55 | 1.8 | 8 | 4,0 |
|
||
|
E.7691.1.0150.12
|
0.75 | 1.5 | 1.44 | 55 | 1.8 | 12 | 4,0 |
|
||
|
E.7691.1.0150.16
|
0.75 | 1.5 | 1.44 | 55 | 1.8 | 16 | 4,0 |
|
||
|
E.7691.1.0150.20
|
0.75 | 1.5 | 1.44 | 55 | 1.8 | 20 | 4,0 |
|
||
|
E.7691.1.0150.25
|
0.75 | 1.5 | 1.44 | 60 | 1.8 | 25 | 4,0 |
|
||
|
E.7691.1.0200.10
|
1 | 2 | 1.92 | 65 | 2 | 10 | 4,0 |
|
||
|
E.7691.1.0200.15
|
1 | 2 | 1.92 | 65 | 2 | 15 | 4,0 |
|
||
|
E.7691.1.0200.20
|
1 | 2 | 1.92 | 65 | 2 | 20 | 4,0 |
|
||
|
E.7691.1.0200.25
|
1 | 2 | 1.92 | 75 | 2 | 25 | 4,0 |
|
||
|
E.7691.1.0200.30
|
1 | 2 | 1.92 | 75 | 2 | 30 | 4,0 |
|
||
|
E.7691.1.0300.05
|
1.5 | 3 | 2.9 | 65 | 3 | 5 | 4,0 |
|
||
|
E.7691.1.0300.10
|
1.5 | 3 | 2.9 | 65 | 3 | 10 | 4,0 |
|
||
|
E.7691.1.0300.15
|
1.5 | 3 | 2.9 | 65 | 3 | 15 | 4,0 |
|
||
|
E.7691.1.0300.20
|
1.5 | 3 | 2.9 | 65 | 3 | 20 | 4,0 |
|
||
|
E.7691.1.0300.25
|
1.5 | 3 | 2.9 | 75 | 3 | 25 | 4,0 |
|
||
|
E.7691.1.0300.30
|
1.5 | 3 | 2.9 | 75 | 3 | 30 | 4,0 |
|
||
|
E.7691.1.0400.10
|
2 | 4 | 3.9 | 65 | 4 | 10 | 6,0 |
|
||
|
E.7691.1.0400.15
|
2 | 4 | 3.9 | 65 | 4 | 15 | 6,0 |
|
||
|
E.7691.1.0400.20
|
2 | 4 | 3.9 | 65 | 4 | 20 | 6,0 |
|
||
|
E.7691.1.0400.25
|
2 | 4 | 3.9 | 75 | 4 | 25 | 6,0 |
|
||
|
E.7691.1.0400.30
|
2 | 4 | 3.9 | 75 | 4 | 30 | 6,0 |
|
||
|
E.7691.1.0500.20
|
2.5 | 5 | 4.9 | 65 | 5 | 20 | 6,0 |
|
||
|
E.7691.1.0500.30
|
2.5 | 5 | 4.9 | 75 | 5 | 30 | 6,0 |
|
||
|
E.7691.1.0600.20
|
3 | 6 | 5.9 | 65 | 6 | 20 | 6,0 |
|
||
|
E.7691.1.0600.30
|
3 | 6 | 5.9 | 75 | 6 | 30 | 6,0 |
|
||
|
E.7691.1.0600.40
|
3 | 6 | 5.9 | 90 | 6 | 40 | 6,0 |
|
