Suitable for material
(Click for material suitability)P
General construction steel / free machining steel
| Material | <500 N/mm² | <700 N/mm² | <850 N/mm² | <1000 N/mm² | <1400 N/mm² |
|---|---|---|---|---|---|
| Suitability |
|
|
|
|
|
P
Heat treatable steel
| Material | <850 N/mm² | <1000 N/mm² | <1400 N/mm² | >1400 N/mm² |
|---|---|---|---|---|
| Suitability |
|
|
|
M
Rust and acid constant steels
| Material | <700 N/mm² | >700 N/mm² |
|---|---|---|
| Suitability |
|
K
Cast iron and cast iron alloy
| Material | Cast iron until 180 HB | Metallable cast iron | Cast iron with nodular graphite |
|---|---|---|---|
| Suitability |
|
|
|
N
Non-ferrous metal, plastics, graphite
| Material | Aluminium und AL-alloyed until 6% Si | Aluminium und AL-alloyed (under 12% Si) | Aluminium alloyed over 12% Si | Copper, brass, bronze, red brass | Plastics - thermoplast | Plastics - duroplast | GFK/CFK | Graphite |
|---|---|---|---|---|---|---|---|---|
| Suitability |
S
Special alloy and titanium
| Material | Inconel, Hastelloy, Nimonic, Monel | Titanium |
|---|---|---|
| Suitability |
H
Hardened steel
| Material | 45-55 HRC | 55-60 HRC | 60-65 HRC |
|---|---|---|---|
| Suitability |
| Product-Nr. |
|
|
|
|
in stock | Request | Alternatives |
|---|---|---|---|---|---|---|---|
| E.3616.1.0200 | 2 | 95 | 45.5 | 4,0 |
|
||
| E.3616.1.0210 | 2.1 | 95 | 50.5 | 4,0 |
|
||
| E.3616.1.0220 | 2.2 | 95 | 50.5 | 4,0 |
|
||
| E.3616.1.0230 | 2.3 | 95 | 55.5 | 4,0 |
|
||
| E.3616.1.0240 | 2.4 | 95 | 55.5 | 4,0 |
|
||
| E.3616.1.0250 | 2.5 | 108 | 60.5 | 4,0 |
|
||
| E.3616.1.0260 | 2.6 | 108 | 60.5 | 4,0 |
|
||
| E.3616.1.0270 | 2.7 | 108 | 65.5 | 4,0 |
|
||
| E.3616.1.0280 | 2.8 | 108 | 65.5 | 4,0 |
|
||
| E.3616.1.0290 | 2.9 | 112 | 68.5 | 4,0 |
|
||
| E.3616.1.0300 | 3 | 112 | 68.5 | 6,0 |
|
||
| E.3616.1.0320 | 3.2 | 120 | 75.5 | 6,0 |
|
||
| E.3616.1.0330 | 3.3 | 120 | 75.5 | 6,0 |
|
||
| E.3616.1.0350 | 3.5 | 130 | 80.5 | 6,0 |
|
||
| E.3616.1.0380 | 3.8 | 140 | 90.5 | 6,0 |
|
||
| E.3616.1.0400 | 4 | 140 | 95.5 | 6,0 |
|
||
| E.3616.1.0420 | 4.2 | 140 | 95.5 | 6,0 |
|
||
| E.3616.1.0450 | 4.5 | 160 | 110.5 | 6,0 |
|
||
| E.3616.1.0460 | 4.6 | 160 | 110.5 | 6,0 |
|
||
| E.3616.1.0480 | 4.8 | 160 | 115.5 | 6,0 |
|
||
| E.3616.1.0500 | 5 | 160 | 115.5 | 6,0 |
|
||
| E.3616.1.0550 | 5.5 | 185 | 140.5 | 6,0 |
|
||
| E.3616.1.0580 | 5.8 | 185 | 140.5 | 6,0 |
|
||
| E.3616.1.0600 | 6 | 185 | 140.5 | 6,0 |
|
||
| E.3616.1.0650 | 6.5 | 190 | 150 | 8,0 |
|
||
| E.3616.1.0680 | 6.8 | 200 | 160 | 8,0 |
|
||
| E.3616.1.0700 | 7 | 210 | 170 | 8,0 |
|
||
| E.3616.1.0750 | 7.5 | 210 | 170 | 8,0 |
|
||
| E.3616.1.0780 | 7.8 | 230 | 190 | 8,0 |
|
||
| E.3616.1.0800 | 8 | 230 | 190 | 8,0 |
|
||
| E.3616.1.0850 | 8.5 | 240 | 196 | 10,0 |
|
||
| E.3616.1.0880 | 8.8 | 260 | 216 | 10,0 |
|
||
| E.3616.1.0900 | 9 | 260 | 216 | 10,0 |
|
||
| E.3616.1.0980 | 9.8 | 280 | 236 | 10,0 |
|
||
| E.3616.1.1000 | 10 | 280 | 236 | 10,0 |
|
||
| E.3616.1.1020 | 10.2 | 290 | 241 | 12,0 |
|
||
| E.3616.1.1080 | 10.8 | 315 | 266 | 12,0 |
|
||
| E.3616.1.1180 | 11.8 | 315 | 266 | 12,0 |
|
||
| E.3616.1.1200 | 12 | 315 | 266 | 12,0 |
|
