Suitable for material
(Click for material suitability)P
General construction steel / free machining steel
| Material | <500 N/mm² | <700 N/mm² | <850 N/mm² | <1000 N/mm² | <1400 N/mm² |
|---|---|---|---|---|---|
| Suitability |
|
|
|
P
Heat treatable steel
| Material | <850 N/mm² | <1000 N/mm² | <1400 N/mm² | >1400 N/mm² |
|---|---|---|---|---|
| Suitability |
|
M
Rust and acid constant steels
| Material | <700 N/mm² | >700 N/mm² |
|---|---|---|
| Suitability |
|
|
K
Cast iron and cast iron alloy
| Material | Cast iron until 180 HB | Metallable cast iron | Cast iron with nodular graphite |
|---|---|---|---|
| Suitability |
N
Non-ferrous metal, plastics, graphite
| Material | Aluminium und AL-alloyed until 6% Si | Aluminium und AL-alloyed (under 12% Si) | Aluminium alloyed over 12% Si | Copper, brass, bronze, red brass | Plastics - thermoplast | Plastics - duroplast | GFK/CFK | Graphite |
|---|---|---|---|---|---|---|---|---|
| Suitability |
|
|
|
|
S
Special alloy and titanium
| Material | Inconel, Hastelloy, Nimonic, Monel | Titanium |
|---|---|---|
| Suitability |
|
H
Hardened steel
| Material | 45-55 HRC | 55-60 HRC | 60-65 HRC |
|---|---|---|---|
| Suitability |
| Product-Nr. |
|
|
|
|
|
|
|
|
|
in stock | Request | Alternatives |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
E.1769.1.M02
|
M 2 | 1.85 | 45 | 7 | 11 | 2,8 | 2,10 | 371 | 0,40 |
|
||
|
E.1769.1.M025
|
M 2,5 | 2.3 | 50 | 9 | 15 | 2,8 | 2,10 | 371 | 0,45 |
|
||
|
E.1769.1.M05
|
M 5 | 4.65 | 70 | 14 | 24.5 | 6,0 | 4,90 | 371 | 0,80 |
|
||
|
E.1769.1.M10
|
M 10 | 9.3 | 100 | 20 | 36 | 10,0 | 8,00 | 371 | 1,50 |
|
||
|
E.1769.1.M12
|
M 12 | 11.2 | 110 | 24 | - | 9,0 | 7,00 | 376 | 1,75 |
|
||
|
E.1769.1.M14
|
M 14 | 13.1 | 110 | 25 | - | 11,0 | 9,00 | 376 | 2,00 |
|
||
|
E.1769.1.M18
|
M 18 | 16.9 | 125 | 28 | - | 14,0 | 11,00 | 376 | 2,50 |
|
||
|
E.1769.1.M20
|
M 20 | 18.9 | 140 | 30 | - | 16,0 | 12,00 | 376 | 2,50 |
|
