HSSE Machine tap through holes, DIN 371/376, coated
E.1792.1
Suitable for material
(Click for material suitability)P
General construction steel / free machining steel
| Material | <500 N/mm² | <700 N/mm² | <850 N/mm² | <1000 N/mm² | <1400 N/mm² |
|---|---|---|---|---|---|
| Suitability |
|
|
|
|
|
P
Heat treatable steel
| Material | <850 N/mm² | <1000 N/mm² | <1400 N/mm² | >1400 N/mm² |
|---|---|---|---|---|
| Suitability |
|
|
|
|
M
Rust and acid constant steels
| Material | <700 N/mm² | >700 N/mm² |
|---|---|---|
| Suitability |
|
K
Cast iron and cast iron alloy
| Material | Cast iron until 180 HB | Metallable cast iron | Cast iron with nodular graphite |
|---|---|---|---|
| Suitability |
|
|
|
N
Non-ferrous metal, plastics, graphite
| Material | Aluminium und AL-alloyed until 6% Si | Aluminium und AL-alloyed (under 12% Si) | Aluminium alloyed over 12% Si | Copper, brass, bronze, red brass | Plastics - thermoplast | Plastics - duroplast | GFK/CFK | Graphite |
|---|---|---|---|---|---|---|---|---|
| Suitability |
|
|
|
|
S
Special alloy and titanium
| Material | Inconel, Hastelloy, Nimonic, Monel | Titanium |
|---|---|---|
| Suitability |
H
Hardened steel
| Material | 45-55 HRC | 55-60 HRC | 60-65 HRC |
|---|---|---|---|
| Suitability |
| Product-Nr. |
|
|
|
|
|
|
|
|
|
in stock | Request | Alternatives |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
E.1792.1.M01
|
M 1 | 0.75 | 40 | 5 | - | 2,5 | 2,10 | 371 | 0,25 |
|
||
|
E.1792.1.M011
|
M 1,1 | 0.85 | 40 | 5 | - | 2,5 | 2,10 | 371 | 0,25 |
|
||
|
E.1792.1.M012
|
M 1,2 | 0.95 | 40 | 5 | - | 2,5 | 2,10 | 371 | 0,25 |
|
||
|
E.1792.1.M014
|
M 1,4 | 1.1 | 40 | 7 | - | 2,5 | 2,10 | 371 | 0,30 |
|
||
|
E.1792.1.M016
|
M 1,6 | 1.25 | 40 | 8 | - | 2,5 | 2,10 | 371 | 0,35 |
|
||
|
E.1792.1.M017
|
M 1,7 | 1.3 | 40 | 8 | - | 2,5 | 2,10 | 371 | 0,35 |
|
||
|
E.1792.1.M018
|
M 1,8 | 1.45 | 40 | 8 | - | 2,5 | 2,10 | 371 | 0,35 |
|
||
|
E.1792.1.M02
|
M 2 | 1.6 | 45 | 8 | - | 2,8 | 2,10 | 371 | 0,40 |
|
||
|
E.1792.1.M022
|
M 2,2 | 1.75 | 45 | 9 | - | 2,8 | 2,10 | 371 | 0,45 |
|
||
|
E.1792.1.M023
|
M 2,3 | 1.9 | 45 | 9 | - | 2,8 | 2,10 | 371 | 0,40 |
|
||
|
E.1792.1.M025
|
M 2,5 | 2.05 | 50 | 9 | - | 2,8 | 2,10 | 371 | 0,45 |
|
||
|
E.1792.1.M026
|
M 2,6 | 2.1 | 50 | 9 | - | 2,8 | 2,10 | 371 | 0,45 |
|
||
|
E.1792.1.M03
|
M 3 | 2.5 | 56 | 11 | 18 | 3,5 | 2,70 | 371 | 0,50 |
|
||
|
E.1792.1.M035
|
M 3,5 | 2.9 | 56 | 12 | 20 | 4,0 | 3,00 | 371 | 0,60 |
|
||
|
E.1792.1.M04
|
M 4 | 3.3 | 63 | 13 | 21 | 4,5 | 3,40 | 371 | 0,70 |
|
||
|
E.1792.1.M045
|
M 4,5 | 3.7 | 70 | 16 | 25 | 6,0 | 4,90 | 371 | 0,75 |
|
||
|
E.1792.1.M05
|
M 5 | 4.2 | 70 | 16 | 25 | 6,0 | 4,90 | 371 | 0,80 |
|
||
|
E.1792.1.M06
|
M 6 | 5 | 80 | 19 | 30 | 6,0 | 4,90 | 371 | 1,00 |
|
||
|
E.1792.1.M08
|
M 8 | 6.8 | 90 | 22 | 35 | 8,0 | 6,20 | 371 | 1,25 |
|
||
|
E.1792.1.M10
|
M 10 | 8.5 | 100 | 24 | 39 | 10,0 | 8,00 | 371 | 1,50 |
|
||
|
E.1792.1.M12
|
M 12 | 10.2 | 110 | 28 | - | 9,0 | 7,00 | 376 | 1,75 |
|
||
|
E.1792.1.M14
|
M 14 | 12 | 110 | 30 | - | 11,0 | 9,00 | 376 | 2,0 |
|
||
|
E.1792.1.M16
|
M 16 | 14 | 110 | 32 | - | 12,0 | 9,00 | 376 | 2,00 |
|
||
|
E.1792.1.M18
|
M 18 | 15.5 | 125 | 34 | - | 14,0 | 11,0 | 376 | 2,50 |
|
||
|
E.1792.1.M20
|
M 20 | 17.5 | 140 | 34 | - | 16,0 | 12,00 | 376 | 2,50 |
|
||
|
E.1792.1.M22
|
M 22 | 19.5 | 140 | 34 | - | 18,0 | 14,50 | 376 | 2,50 |
|
||
|
E.1792.1.M24
|
M 24 | 21 | 160 | 38 | - | 18,0 | 14,50 | 376 | 3,00 |
|
