HSSE Machine tap G", DIN 5156, for through holes, coated
E.1805.1
Suitable for material
(Click for material suitability)P
General construction steel / free machining steel
| Material | <500 N/mm² | <700 N/mm² | <850 N/mm² | <1000 N/mm² | <1400 N/mm² |
|---|---|---|---|---|---|
| Suitability |
|
|
|
|
|
P
Heat treatable steel
| Material | <850 N/mm² | <1000 N/mm² | <1400 N/mm² | >1400 N/mm² |
|---|---|---|---|---|
| Suitability |
|
|
|
|
M
Rust and acid constant steels
| Material | <700 N/mm² | >700 N/mm² |
|---|---|---|
| Suitability |
|
K
Cast iron and cast iron alloy
| Material | Cast iron until 180 HB | Metallable cast iron | Cast iron with nodular graphite |
|---|---|---|---|
| Suitability |
|
|
|
N
Non-ferrous metal, plastics, graphite
| Material | Aluminium und AL-alloyed until 6% Si | Aluminium und AL-alloyed (under 12% Si) | Aluminium alloyed over 12% Si | Copper, brass, bronze, red brass | Plastics - thermoplast | Plastics - duroplast | GFK/CFK | Graphite |
|---|---|---|---|---|---|---|---|---|
| Suitability |
|
|
|
|
S
Special alloy and titanium
| Material | Inconel, Hastelloy, Nimonic, Monel | Titanium |
|---|---|---|
| Suitability |
H
Hardened steel
| Material | 45-55 HRC | 55-60 HRC | 60-65 HRC |
|---|---|---|---|
| Suitability |
| Product-Nr. |
|
|
|
|
|
|
|
in stock | Request | Alternatives |
|---|---|---|---|---|---|---|---|---|---|---|
| E.1805.1.0006 | G 1/16" | 90 | 20 | - | 6,0 | 4,90 | 28,0 |
|
||
| E.1805.1.0012 | G 1/8" | 90 | 20 | - | 7,0 | 5,50 | 28,0 |
|
||
| E.1805.1.0025 | G 1/4" | 100 | 22 | - | 11,0 | 9,00 | 19,0 |
|
||
| E.1805.1.0037 | G 3/8" | 100 | 22 | - | 12,0 | 9,00 | 19,0 |
|
||
| E.1805.1.0050 | G 1/2" | 125 | 25 | - | 16,0 | 12,00 | 14,0 |
|
||
| E.1805.1.0062 | G 5/8" | 125 | 25 | - | 18,0 | 14,50 | 14,0 |
|
||
| E.1805.1.0075 | G 3/4" | 140 | 28 | - | 20,0 | 16,00 | 14,0 |
|
||
| E.1805.1.0100 | G 1" | 160 | 30 | - | 25,0 | 20,00 | 11,0 |
|
Customers have also seen
