HSSE Machine tap 45° "UNF", DIN 2184-1, for blind holes, coated
E.1810.1
The delivery time is 5–7 working days!
Suitable for material
(Click for material suitability)P
General construction steel / free machining steel
| Material | <500 N/mm² | <700 N/mm² | <850 N/mm² | <1000 N/mm² | <1400 N/mm² |
|---|---|---|---|---|---|
| Suitability |
|
|
|
|
|
P
Heat treatable steel
| Material | <850 N/mm² | <1000 N/mm² | <1400 N/mm² | >1400 N/mm² |
|---|---|---|---|---|
| Suitability |
|
|
|
|
M
Rust and acid constant steels
| Material | <700 N/mm² | >700 N/mm² |
|---|---|---|
| Suitability |
|
K
Cast iron and cast iron alloy
| Material | Cast iron until 180 HB | Metallable cast iron | Cast iron with nodular graphite |
|---|---|---|---|
| Suitability |
|
|
|
N
Non-ferrous metal, plastics, graphite
| Material | Aluminium und AL-alloyed until 6% Si | Aluminium und AL-alloyed (under 12% Si) | Aluminium alloyed over 12% Si | Copper, brass, bronze, red brass | Plastics - thermoplast | Plastics - duroplast | GFK/CFK | Graphite |
|---|---|---|---|---|---|---|---|---|
| Suitability |
|
|
|
|
S
Special alloy and titanium
| Material | Inconel, Hastelloy, Nimonic, Monel | Titanium |
|---|---|---|
| Suitability |
H
Hardened steel
| Material | 45-55 HRC | 55-60 HRC | 60-65 HRC |
|---|---|---|---|
| Suitability |
| Product-Nr. |
|
|
|
|
|
|
|
|
|
in stock | Request | Alternatives |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
E.1810.1.0025
|
5.5 | UNF 1/4-28 | 80 | 10.2 | 30 | 7,0 | 5,50 | 2184-1 | 28,00 |
|
||
|
E.1810.1.0031
|
6.9 | UNF 5/16-24 | 90 | 11.3 | 35 | 8,0 | 6,20 | 2184-1 | 24,00 |
|
||
|
E.1810.1.0037
|
8.5 | UNF 3/8-24 | 90 | 12.7 | 35 | 10,0 | 8,00 | 2184-1 | 24,00 |
|
||
|
E.1810.1.0043
|
9.9 | UNF 7/16-20 | 100 | 14.5 | - | 8,0 | 6,20 | 2184-1 | 20,00 |
|
||
|
E.1810.1.0050
|
11.5 | UNF 1/2-20 | 100 | 15.6 | - | 9,0 | 7,00 | 2184-1 | 20,00 |
|
||
|
E.1810.1.0056
|
12.9 | UNF 9/16-18 | 100 | 16.9 | - | 11,0 | 9,00 | 2184-1 | 18,00 |
|
||
|
E.1810.1.0062
|
14.5 | UNF 5/8-18 | 100 | 18.5 | - | 12,0 | 9,00 | 2184-1 | 18,00 |
|
||
|
E.1810.1.0075
|
17.5 | UNF 3/4-16 | 110 | 25.4 | - | 14,0 | 11,00 | 2184-1 | 16,00 |
|
||
|
E.1810.1.0087
|
20.4 | UNF 7/8-14 | 125 | 28.2 | - | 18,0 | 14,50 | 2184-1 | 14,00 |
|
||
|
E.1810.1.0100
|
23.25 | UNF 1-12 | 140 | 31.8 | - | 18,0 | 14,50 | 2184-1 | 12,00 |
|
||
|
E.1810.1.N02
|
1.85 | UNF NR.2 | 45 | 3.6 | 11 | 2,8 | 2,10 | 2184-1 | 64,00 |
|
||
|
E.1810.1.N03
|
2.15 | UNF NR.3 | 50 | 3.6 | 13 | 2,8 | 2,10 | 2184-1 | 56,00 |
|
||
|
E.1810.1.N04
|
2.4 | UNF NR.4 | 56 | 5.1 | 18 | 3,5 | 2,70 | 2184-1 | 48,00 |
|
||
|
E.1810.1.N05
|
2.7 | UNF NR.5 | 56 | 5.1 | 18 | 3,5 | 2,70 | 2184-1 | 44,00 |
|
||
|
E.1810.1.N06
|
2.95 | UNF NR.6 | 56 | 6.4 | 20 | 4,0 | 3,00 | 2184-1 | 40,00 |
|
||
|
E.1810.1.N08
|
3.5 | UNF NR.8 | 63 | 6.4 | 21 | 4,5 | 3,40 | 2184-1 | 36,00 |
|
||
|
E.1810.1.N10
|
4.1 | UNF NR.10 | 70 | 8.5 | 25 | 6,0 | 4,90 | 2184-1 | 32,00 |
|
||
|
E.1810.1.N12
|
4.6 | UNF NR.12 | 80 | 8.5 | 30 | 6,0 | 4,90 | 2184-1 | 28,00 |
|
